Cabinet Hardware Jig
Install knobs and handles in seconds with the most accurate cabinet hardware jig on the market. Perfect results every time on any cabinet door or drawer front.
Recommended by
CHJ
Cabinet Hardware Jig ORIGINAL + Case
$199
Free Shipping
On orders over $49 within the contiguous USA.
Money Back Guarantee
If this isn't one of the best tools you have ever owned simply return it for a full refund within 60 days of purchase.
Includes Rapid Center Extension for rapid, repeat drawer & door fronts.
$249
Includes both Long Pull & Rapid Center Extensions for even more capability for rapid centering, long hardware, and shelf pins.
$299
Specifications
Lifetime Bushing Warranty
Instructions
Perfect Hardware Every Time
HOW IT WORKS
- Drawer Install
- Door Install
-
Set Hardware Spacing
Quickly and accurately space your hardware using our hardware spacing pins.
-
Set Location
Place hardware on cabinet to find the position you like, then simply transfer measurements to the jig.
-
Hold. Drill. Repeat.
No clamp needed! Simply hold and drill. Easily repeat on same-sized drawers/doors.
Built For Speed
Our Cabinet Hardware Jig doesn’t require marking or clamping. Created from a superior, hardened anodized aluminum that comes equipped with laser engraved rulers and case hardened bushings.
The Only Cabinet Hardware Jig For Shaker Drawers
Get the stability you need to drill into recessed panels with our patent-pending adjustable Shaker Drawer Spacers.
The Only Calibrated Cabinet Hardware Jig
10x more precise than imitations, with proven results you can count on. Patent-pending True Calibration™ system with Perfect Match™ laser engraved rulers. The most accurate cabinet hardware jig on the market.
Imitations Won’t Do
Our hardware jig is designed for the accuracy and durability you need. We hand assemble parts that are machined to ±0.0002” tolerance and then each completed jig is calibrated to .005” square. This can only be achieved using the highest grade materials and aerospace precision.
Pinnacle of Innovation
Developed and machined with an unprecedented grade of precision, durability and versatility. With such unique precision and robust build strength, the only tool that allows you to drill directly through it without the need for clamps or marking hole locations.
Premium Build Quality
- 3x Stronger Anodized Aluminum
- Lightweight, Strength of Steel
- Bushings Last 10,000+ Holes
- Laser Engraved English & Metric Rulers
Our “Precision Guarantee” promise is that each jig we produce adheres to our exact specifications, with the highest quality American parts.
If you receive your hardware jig and feel that it’s not one of the best products you’ve ever purchased, please contact True Position Tools within 60 days of purchase for a full refund.
What People Are Saying
"Saves hours on every single kitchen install."
"Gives you the ability to repeat perfectly whole layout from door to door, drawer to drawer--without worrying about wrecking the front of an expensive cabinet by poorly placed hole."
– Essential Craftsman
FAQs
Not at all! This tool is very easy to use and designed to take the frustration out of hardware installation for homeowners and cabinet professionals alike. It is used by many professionals due to its substantial time savings, unrivaled accuracy, and durability.
12” Center-to-Center (300mm) for the Original (TP-CHJ) & PRO (TP-CHJ-PRO)
For cabinet handles larger than 12″, purchase the Cabinet Hardware Jig MAX (TP-CHJ-MAX) to install hardware up to 38″ (960mm).
If you already own the Original Cabinet Hardware Jig (TP-CHJ), you can upgrade to the MAX with the Long Pull & Rapid Center Combo (TP-CHJ-LPRC).
For even longer pulls, multiple jigs can be conjoined via thumb screws to drill for any length of handle.
Yes! Just set up the tool for one door and you can flip and drill for the next. We recommend checking that your thumb screws are still tight before drilling the next hole.
Yes, our Cabinet Hardware Jigs now include our new Shaker Drawer Spacers (TP-CHJ-SDS), so installing hardware on Shaker drawer fronts has never been easier. Our specialized jig is the only tool available that can accurately and quickly help you install handles on the inset panel of drawers.
For more information, see our guide on Shaker drawer hardware placement.
If you previously purchased a Cabinet Hardware Jig and it did not come with Shaker Drawer Spacers, they are available for purchase.
Always make sure to start with a sharp drill bit. Generally chipping is not an issue with the provided drill bit. Extra precautions include taping the work surface with blue painter’s tape. For melamines and veneers, consider using a brad point bit.
True Position Tools has high-quality 5mm brad point drill bits available for purchase in our store.
Always use a sharp drill bit and relieve chips as you drill by pulling the drill out of the workpiece as it’s running to spin off excess wood chips. Do not apply much pressure while drilling, especially at the end of the hole. Holding or clamping a sacrificial block of scrap wood against the back of the door while you drill is recommended for extra protection against blowout.
In most cases, the screw head covers any minimal blowout. In extreme cases, where a screw head would not cover minimal chipping from the exit of the drill, users will drill the hole halfway with a standard drill bit, then use a tapered drill bit to finish the hole. To prevent drilling injuries, always be aware of where your hands are positioned.
1/2″ width — The small and large end stops can also be reversed if extra clearance is needed.
16″ — Be advised, it’s typically not preferred to place hardware on the center of a large drawer front as it can make it more difficult to open. In most cases, placing the hardware more towards the top of the drawer front is desired for operation and aesthetics.
Over the years, many! Changes to the jig include a larger top stop, more durable thumb screws, a redesigned end stop, and extending the bottom rail of the T-square by approximately 1”. We now also laser etch the numbers into the jig, where before we screen printed them over the aluminum T-Square. We are the only Cabinet Hardware Jig in Black! In recent years, the tool has started shipping in a hard plastic case instead of a cardboard box.
Every Cabinet Hardware Jig now includes an Accessory Kit that contains Hardware Spacing Pins, Shaker Drawer Spacers, and Magnetic Bushing Covers.
Yes! Every part of the tool is either covered under warranty or can be purchased separately. We have many commonly needed replacement parts available on our website. Please contact us here or call 760-279-3033 if you are having trouble finding the part you need.
Top (large) stop and T-square parts are only available as a set, as they need to be precision-mated in-house to a tolerance of .001” square for us to be able to guarantee their accuracy.
Color: Since 2017 we’ve been making our jig in “TPT Black”.
Calibration: Inside your case you’ll find a Certificate of Calibration with a unique serial number for your jig. On the jig itself, you’ll also find a protective sticker covering the two factory calibrated screws.
Laser-Etched Rulers: Our rulers are precision laser-etched which is a permanent etching. Imitation jigs are screen printed and can rub off with use.
Made in USA: True Position Tools makes the only Cabinet Hardware Jig that is made in the USA. Imitation jigs are crudely made overseas.
Share your thoughts!
4.87 out of 5 stars
611 reviews
Let us know what you think...
5 reviews with a 5-star rating
Amazon Customer (verified owner) –
Accurate, sturdy and easy to set up. I do many kitchens in my remodeling business. I’ve always dreaded tedious and time consuming chore of manually marking hole placement when it comes time to install hardware. I usually make jigs, one for each size panel. With this tool it’s a quick setup for the span of any knob or two screw drawer pull. I would estimatime the time savings at 80%
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jim Martinez (verified owner) –
Great quality
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
robert j frese (verified owner) –
This tool is the very best on the market at its job trust me I tried all the others at a considerable waste of time. My first review was disallowed due to my colorful language about the other products that I tried prior I hope that this time they allow it because as I said this tool truly deserves an AAA+ review. If installing hardware you can’t go wrong with it. The others can’t be held in a position to drill correctly the drill bit guides where worn out on the first door and many other reasons not to buy them. I know that the price for this tool is considerably higher than the others but every dime spent over the cost of the others is money well spent. Please trust me and don’t do as I did and waste your time and money on the others buy this product and get your job done right and on time. I have asked my wife to bury me with this it’s that good !!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Amazon CustomerAmazon Customer (verified owner) –
We install 76 knobs and pulls throughout our house. A retail store wanted $1400 to install them not including the $1200 we already spent on the knobs and pulls. I said there has to be a cheaper solution. That is where I found the True Position Pro. Tons of YouTube videos on how to install knobs and pulls and most of the pros were using or recommending the True Position jig. Well it works very well and makes the process very easy to repeat the positions over and over. It took us a little over 3 hours to install all 76 of our knobs and pull. A lot of that time was trying to decide where we wanted them. Once that was figured out. It was very easy to set up the jig and repeat the process to the next door or drawer. Not one mistake and they turned out AWESOME!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
bryan krall (verified owner) –
Great tool have done two kitchen projects and two bathroom projects. Buy the kit with everything you can get away with the smaller one but when you have wide drawers you need everything. Cheers!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Login
Continue as a Guest
Continue as a Guest