Cabinet Hardware Jig

Install knobs and handles in seconds with the most accurate cabinet hardware jig on the market. Perfect results every time on any cabinet door or drawer front.


Recommended by



Cabinet Hardware Jig ORIGINAL + Case


FREE Shipping
Money Back Guarantee
$50 - Upgrade to PRO
Cabinet Hardware Jig PRO on Shaker Drawer

Includes Rapid Center Extension for rapid, repeat drawer & door fronts.


$100 - Upgrade to MAX
Cabinet Hardware Jig MAX on Shaker Drawer Front

Includes both Long Pull & Rapid Center Extensions for even more capability for rapid centering, long hardware, and shelf pins.


Need Help Choosing?
Need Help Choosing?
What's Included
Lifetime Bushing Warranty

Perfect Hardware Every Time


  • Set Hardware Spacing

    Quickly and accurately space your hardware using our hardware spacing pins.

  • Set Location

    Place hardware on cabinet to find the position you like, then simply transfer measurements to the jig.

  • Hold. Drill. Repeat.

    No clamp needed! Simply hold and drill. Easily repeat on same-sized drawers/doors.


Made in USA Since 1996

Built For Speed

Our Cabinet Hardware Jig doesn’t require marking or clamping. Created from a superior, hardened anodized aluminum that comes equipped with laser engraved rulers and case hardened bushings.

The Only Cabinet Hardware Jig For Shaker Drawers

Get the stability you need to drill into recessed panels with our patent-pending adjustable spacers.

True Calibrated – Cabinet Hardware Jig ORIGINAL TP-CHJ

The Only Calibrated Cabinet Hardware Jig

10x more precise than imitations, with proven results you can count on. Patent-pending True Calibration™ system with Perfect Match™ laser engraved rulers. The most accurate cabinet hardware jig on the market.

Imitations Won’t Do

Our hardware jig is designed for the accuracy and durability you need. We hand assemble parts that are machined to ±0.0002” tolerance and then each completed jig is calibrated to .005” square. This can only be achieved using the highest grade materials and aerospace precision.

Pinnacle of Innovation

Developed and machined with an unprecedented grade of precision, durability and versatility. With such unique precision and robust build strength, the only tool that allows you to drill directly through it without the need for clamps or marking hole locations.

Premium Build Quality

Our “Precision Guarantee” promise is that each jig we produce adheres to our exact specifications, with the highest quality American parts.

If you receive your hardware jig and feel that it’s not one of the best products you’ve ever purchased, please contact True Position Tools within 60 days of purchase for a full refund.

What People Are Saying

"Saves hours on every single kitchen install."

"Gives you the ability to repeat perfectly whole layout from door to door, drawer to drawer--without worrying about wrecking the front of an expensive cabinet by poorly placed hole."

– Essential Craftsman

Recommended by Tom Silva.

– This Old House

"5 Stars for Fit, Finish, and Function."

– Next Level Carpentry

"Game changer."

– Fine Woodworking Magazine

"This will be in my shop...forever."

– Jason Bent

"Knobs & pulls made easy."

"Fast and repeatable, just what you want when installing a kitchen's worth of pulls."

– Woodcraft Magazine

"Knobs & pulls made easy."

"Fast and repeatable, just what you want when installing a kitchen's worth of pulls."

– Woodcraft Magazine

"Game changer."

– Fine Woodworking Magazine

"This will be in my shop...forever."

– Jason Bent

Max Handle Width:  12″ Center-to-Center
Max Centering (on drawer front width/door height):  18” with end stop, Infinite with center mark
Max Drawer Front Centering Height:  16″
Max Shelf Pin Hole Pattern:  3 holes
Min. Width Door Panel (stile/rail):  1/2″
Min. Placement From Edge (of door/drawer front): 1/4″
Tool Dimensions:  9.5” x 12.5″ x 2”
Bushings: 5mm x 1/2″ length
Material:  Hardened anodized aluminum, Case-hardened steel bushings, Stainless steel thumb screws
Carrying Case:  Hardened plastic, Stainless steel latches
Weight:  4.3 lbs with case
Notice:  Proposition 65


Not at all!  This tool is very easy to use and designed to take the frustration out of hardware installation for homeowners and cabinet professionals alike. It is used by many professionals due to its substantial time savings, unrivaled accuracy, and durability.

12” Center-to-Center (300mm) for the Original (TP-CHJ) & PRO (TP-CHJ-PRO)

For cabinet handles larger than 12″, purchase the Cabinet Hardware Jig MAX (TP-CHJ-MAX) to install hardware up to 38″ (960mm).

If you already own the Original Cabinet Hardware Jig (TP-CHJ), you can upgrade to the MAX with the Long Pull & Rapid Center Combo (TP-CHJ-LPRC).

For even longer pulls, multiple jigs can be conjoined via thumb screws to drill for any length of handle.

Yes!  Just set up the tool for one door and you can flip and drill for the next. We recommend checking that your thumb screws are still tight before drilling the next hole.

Yes, our Cabinet Hardware Jigs now include our new Shaker Drawer Spacers (TP-CHJ-SDS), so installing hardware on Shaker drawer fronts has never been easier.  Our specialized jig is the only tool available that can accurately and quickly help you install handles on the inset panel of drawers.

For more information, see our guide on Shaker drawer hardware placement.

If you previously purchased a Cabinet Hardware Jig and it did not come with Shaker Drawer Spacers, they are available for purchase

Always make sure to start with a sharp drill bit. Generally chipping is not an issue with the provided drill bit. Extra precautions include taping the work surface with blue painter’s tape. For melamines and veneers, consider using a brad point bit. 

True Position Tools has high-quality 5mm brad point drill bits available for purchase in our store.

Always use a sharp drill bit and relieve chips as you drill by pulling the drill out of the workpiece as it’s running to spin off excess wood chips. Do not apply much pressure while drilling, especially at the end of the hole. Holding or clamping a sacrificial block of scrap wood against the back of the door while you drill is recommended for extra protection against blowout.

In most cases, the screw head covers any minimal blowout. In extreme cases, where a screw head would not cover minimal chipping from the exit of the drill, users will drill the hole halfway with a standard drill bit, then use a tapered drill bit to finish the hole. To prevent drilling injuries, always be aware of where your hands are positioned.

1/2″ width — The small and large end stops can also be reversed if extra clearance is needed. 

16″ — Be advised, it’s typically not preferred to place hardware on the center of a large drawer front as it can make it more difficult to open. In most cases, placing the hardware more towards the top of the drawer front is desired for operation and aesthetics. 

Over the years, many! Changes to the jig include a larger top stop, more durable thumb screws, a redesigned end stop, and extending the bottom rail of the T-square by approximately 1”. We now also laser etch the numbers into the jig, where before we screen printed them over the aluminum T-Square.  In recent years, the tool has started shipping in a hard plastic case instead of a cardboard box. 

Every Cabinet Hardware Jig now includes an Accessory Kit that contains Hardware Spacing Pins, Shaker Drawer Spacers, and Magnetic Bushing Covers. 

Yes! Every part of the tool is either covered under warranty or can be purchased separately. We have many commonly needed replacement parts available on our website. Please contact us here or call 760-279-3033 if you are having trouble finding the part you need.

Top (large) stop and T-square parts are only available as a set, as they need to be precision-mated in-house to a tolerance of .001” square for us to be able to guarantee their accuracy.

Share your thoughts!

4.86 out of 5 stars

544 reviews

Let us know what you think...

5 reviews with a 5-star rating

  1. Tremendous help

    Amazon Customer (verified owner)

    I’m a ‘suit’ with home repair / remodeling as a major hobby. For a total kitchen renovation, I decided to do most things myself – including installing 28 door / drawer pulls. This device is straightforward, simple to use, flawlessly designed and executed. For accuracy, time savings, confidence building and excellent results, the tp-1934 was well worth the price.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Excellent Jig

    Steve Dobrenz (verified owner)

    This jig works extremely well! Accurate scales made it simple to set drill guides to the proper spacing. Large contact point with door/drawer made it easy to hold the jig in place while drilling. Using this jig cuts the time to install cabinet/drawer hardware in half.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. True Position Hardware Jig

    Gary D. Redman (verified owner)

    High Quility, easy to use, and saves time. I installed two kitchens with hardware, kitchens had the same amount of hardware, the first took 2 hours and 15 min. the next one took 1 hour and 30 min. The more I used the jig it took less time per handle.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Expensive, but worth it for some

    C. Saxon (verified owner)

    I purchased the TP 1935, but for most people the TP 1934 will do. I build cabinets and everyone wants a different style and size pull or handle. This guide is precision made and can handle all of them. a simple twist of a knob and set the handle width. Twist the other knob and set the set off distance from the edge, top or bottom. Drill your holes and move on. I’ve dropped it on concrete and didn’t faze it. It’s a bit expensive but since it can easily handle whatever you throw at it I think it’s worth it.The only negative is the price. If they would knock about $50 off I think they would be a best seller!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Greatest time saver tool ever!!!

    K. Stetz (verified owner)

    Got this tool a while back and it has saved me so much time installing hardware. I definitely recommend getting the TP-1935! it really helps with those 32mm shelf holes. This tool has changed the way that I work now adays. can’t believe I ever got by making my own jigs for ever job. Fully adjustable and easy to work. If you are installing hardware, in the shop or on the job, get this tool!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...



Continue as a Guest