Cabinet Door Handle Installation
Simple instruction for installing handles on a cabinet door using the TP-1934 Cabinet Hardware Jig
1. Place hardware (measure as needed) to find position you like; mark bottom hole location.
2. Measure from bottom of door to mark
3. Set Sliding End Stop to measurement from step 2 and tighten
4. Measure from side of door to mark
5. Set Large Stop to measurement from step 4 and tighten
6. Measure hole centers
7. Transfer hardware measurement from step 6 to Sliding Drill Guide and tighten
8. Position tool as shown, drill through fixed center bushing for bottom hole
9. Drill through Sliding Drill Guide for top hole
10. Reverse tool position onto opposite door and drill holes
