Previous
Next

16mm / 32mm C-C Hardware Installation Set

(4 customer reviews)

For installation of 16mm and 32mm CC pulls and knobs on cabinet doors and drawer fronts.

  • 16mm / 32mm C-C knob and pull installation made easy and accurate
  • Fits all TP Hardware Jig products
  • Durable aircraft quality aluminum
  • 5mm case hardened steel bushings are replaceable
  • Made in USA

$49.99

Only 11 left in stock

SKU#: TP-SDG1632

  • Free Shipping*

* 2 Day Shipping from time of processing

60-Day Money Back Guarantee

Description

For installation of 16mm and 32mm C-C pulls and knobs on cabinet doors and drawer fronts. Sliding Drill Guide attaches to TP-1934 and TP-1935 Cabinet Hardware Jigs.

16mm Sliding Drill Guide
32mm Sliding Drill Guide

C-C: 16mm, 32mm
Material: Durable aircraft quality anodized aluminum
Bushings: Case hardened steel, Lifetime Warranty
Weight: 0.44 lbs
Notice: Proposition 65

TP-SDG1632 Instructions
True Position Tools 2020 Brochure

TP-SDG1632 - 16mm 32mm CC Hardware Installation Set

You may also like…

  • Strip Light Jig / Puck Light Jig + Case Quick View
  • Cabinet Hardware Jig MAX Quick View

Related products

  • Replacement Shaker Drawer Front Kit Quick View
  • Replacement Shaker Drawer Front Thumbscrews Quick View
  • Cabinet Hardware Jig PRO Quick View
  • Replacement T-Square Quick View
  • Aluminum Stop Collar Set Quick View
  • Extension Set Quick View
  • 5mm Aluminum Stop Collar Quick View
  • 5mm HSS Brad Point Jobber Bit (2 Pack) Quick View
  • Replacement Sliding End Stop Quick View
  • Extension Set + Case Quick View
  • Replacement Sliding Drill Guide Quick View
  • 5mm Jobber Length Drill Bit (10 pack) Quick View

Reviews

Share your thoughts!

4.75 out of 5 stars

4 reviews

5 3
4 1
3 0
2 0
1 0

Let us know what you think...

Leave a Review

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Continue as a Guest

SIGN UP FOR SPECIAL OFFERS

Get Updates on Products, News and More

Facebook-f Instagram Youtube Pinterest-p
  • 49737 Park Ave
  • Morongo Valley, CA 92256
  • Phone: (760) 279-3033

Company

Support

Helpful Links

Copyright © 2020 True Position Tools. All Rights Reserved.

For installation of 16mm and 32mm CC pulls and knobs on cabinet doors and drawer fronts. TP-SDG1632
$49.99 instock 2021-11-25
4.75 out of 5 based on 4 reviews
Love this - by ,
5/ 5stars
I install hardware about once a month. With this tool I have had no issues. It works just like it says it does.
If you buy anything else you’re wasting your money! - by ,
5/ 5stars
I install cabinets for a living and this is the best, most durable and time saving tool I’ve ever used. No more shop made jigs that work for the first several times until the hole becomes sloppy and the screw holes are off center. No plastic parts. Easy to read, accurate calibrations make this the go to tool for hardware installs.
The best cabinet hole jig on Earth - by ,
5/ 5stars
I love this fine piece of human technology! Only complaint I have is when I drill holes for the shaker style drawer. You need to create a 1/4" boot to slip onto the piece that the drill bit passes through. Also it would nice to mark the tool holders and accessories in the case. A definite time and mistake free operation!
Great Tool - by the time you make template you would have most of your holes drilled - by ,
5/ 5stars
huge timesaver - super easy setup - I attach my hardware to the jig to set spacing and then align to doors or drawer - even if you are just installing hardware on one kitchen full of cabinets - this tool is worth it -
Best Tool I Have Ever Bought. - by ,
5/ 5stars
WORTH EVERY CENT! I have never installed door hardware. I installed 65 handles flawlessly in under 4 hours. Sometimes you have to buy the right tool regardless of cost and this is one of those times. Don’t hesitate.
Precision tool - by ,
5/ 5stars
Impeccable tool. Don’t waste your money on cheaper imitations, this is the original and the best.
Right tool for the job - by ,
5/ 5stars
It worked well
Right tool for the job - by ,
5/ 5stars
It worked well
Right tool for the job - by ,
5/ 5stars
It worked well
Right tool for the job - by ,
5/ 5stars
It worked well
Greta product - by ,
5/ 5stars
Wish I would have purchased this a long time ago. Every handle DEAD ON.
Buy it! - by ,
5/ 5stars
We had a new construction with a ton of cabinets, drawers and closet doors and this made our job so much easier! The accuracy was fabulous! We highly recommend this jig!!
Not worthy - by ,
2/ 5stars
It’s not as good as my 30c plastic template. Too complex and my measurements were still off by a 1/16
Recommended!!! - by ,
5/ 5stars
Excellent tool, I did a full kitchen pullers in less than 2 hours
Door and drawer handles - by ,
5/ 5stars
Love it.
Don’t hesitate, BUY IT! - by ,
5/ 5stars
So much easier and versatile than the Kreg tool! But then, it’s not fair to compare them because this thing is in a class by itself. The price is steep, but this is an instrument, not a toy. Don’t hesitate, BUY IT!
Ease of use & reversible configuration... - by ,
5/ 5stars
Makes installing cabinet hardware almost fool-proof...
USA made quality product - by ,
5/ 5stars
You get what you pay for right? Yes this alignment jig is expensive, but well worth the money. If you think the “ knock offs” are just as good, you would be grossly mistaken. Just like I was. This is by far a superior tool for cabinet installers.
Worth Every Penny! - by ,
5/ 5stars
We are upgrading our kitchen cabinets and the easiest way to add pizazz is to add cabinet hardware. After we have selected knobs for our cabinet doors and handles for drawers, the task of installing them was a bit overwhelming for me. Although I have the Kreg Cabinet Hardware jig, which I have used in the past to build my garage cabinet, I wasn't too sure how it would do on our kitchen cabinet. One screwup and it's an expensive repair work, not to mention I may not be able to replace the door or drawer pattern. Kreg jig is accurate but does not give you a 2nd reference plane; it is basically a manual task and you have to measure the 2nd reference every door to be sure.I found the True Position tool after watching many DIY YouTube on installing cabinet hardware. So I decided to get it, and boy, that was the best decision I have ever made. The tool is exactly what one would need to install hardware. It provides 2 reference planes, so once you set the location of the hardware, you don't have to re-measure each door. This tool will give you repeatable drilling accurately and spot on every time. It is a timer saver and most of all, minimize guess work or errors.While the tool is expensive comparing to Kreg jig and some other knockoffs on Amazon, it is worth every penny because it takes away possible errors thus save time, money, and frustration for DIYers. The tool is very well made, with measurement marks laser edged. It comes in a blow-mold case, and everything is ready to go. The accuracy of the tool is just amazing! Can't praise it enough!I finished my installation, and the whole job took about 2 hours, because I was taking my time making sure to double check the tool with actual measurements. Once I am convinced that the tool is truly accurate, the rest of the installation went like a breeze. All knobs and handles are perfectly aligned and leveled... so amazing!Last but not least, this tool is designed and made in the USA... Yes, it is made here 100%! Good old American ingenuity!
Well worth the money - by ,
5/ 5stars
Cut your time in half! Easy and accurate! Takes the stress out of drilling door fronts.
Solid tool - by ,
5/ 5stars
Love the solid construction. Tool free adjustment would help relieve grabbing the Allen wrench.
The pro tool! - by ,
5/ 5stars
I regret not to have bought this before!So helpful, accurate, and time saving!Highly recommend!
Works fine - by ,
3/ 5stars
Is nice tool, only comment will hard to use in shaker style door, is perfect just for flat doors, then good tool
This is a high quality product - by ,
5/ 5stars
I purchased a cheaper version, and had to return it. This is the real deal, and worth every penny. I installed >50 two-hole handles with no issues whatsoever.
. - by ,
5/ 5stars
It is professional tool.
easy to use for amateur - by ,
5/ 5stars
This was my first time installing door/drawer handles. I read many reviews and picked up several helpful hints like 1] get a better drill bit, 2] use a backing block, 3] use an "Irwan" clamp. Today I installed the first 24 of 64 handles with no mishaps.
Excellent - by ,
5/ 5stars
Perfect tool for the job
Buy this. Buy American. - by ,
5/ 5stars
Great jig. Made my life a thousand times easier. Also outstanding customer service. They recently found a manufacturing issue with their jig. Out of the blue I received the replacement parts and a new bit free of charge. I never knew there was an issue. They took care of it free of charge.
Great tool - by ,
5/ 5stars
Easy and accurate to use
Awesome - by ,
5/ 5stars
This jig is awesome. Easy to set up and very accurate.
perfect - by ,
5/ 5stars
I read the reviews about the lock bolts coming lose and just snugged them down with some pliers and it worked perfect. Just snug them down a little bit, not too much to strip them out, just more than hand tight.
Best tool for installation of hardware on cabinets. - by ,
5/ 5stars
I installed new hardware on my new kitchen cabinets. This tool made each handle centered and uninformed. Highly recommended it.
Worked Well In The Beginning But Had Problems - by ,
2/ 5stars
Worked well at first, then started drilling holes crooked. The bushings were destroyed after a few holes. Called customer service. They stated there was a group of jigs produced that had a manufacturing defect. They shipped out new parts, but that doesn't fix cabinets with crooked holes. Expected better since the tool was so expensive, but I would have been just as well off buying the cheaper versions.
Excellent product - by ,
5/ 5stars
Not only was it a dream to use, but a month later they sent replacement parts to deal with the slippage issues some folks had. I had no issues but it was an indication they stand behind their product. Just be sure to cover the drill hole you’re not using! Experience.
Great product - by ,
5/ 5stars
Great product
- by ,
5/ 5stars
I'm not the type of person that leaves reviews. But after using the tool yesterday I felt compelled. I believe in buying quality tools I must say this is definitely high quality. Simple and efficient. I installed pulls in a 3,500 sqft custom home with lots of cabinets and drawers. I installed everything in less than 2 hrs all the doors were in 15 mins. Highly recommend the tool you get what you pay for. Worth the price.
Time and Waste Saver! - by ,
5/ 5stars
Love it! Wish we'd had it years ago!
Case could be improved - by ,
4/ 5stars
Hot tip for everyone is you better keep the paper packaging that the hard case comes in because those are your instructions. I cut that into manageable pieces that would fit inside the hard case so I have instructions inside the hard case. The only thing that is terrible on this unit is the plastic bit of the hard case that is intended to house to extension ruler. That is probably the only thing the manufacturer outsources. So all the components that the manufacturer directly makes are excellent. The rotomolded plastic case has some inaccuracy inside. I fixed it with my dremel. I do recommend getting the hard case regardless, because you need to keep your precious tool safe, and the case does do that. It has quality hinges and latches that are not likely to ever break.I did a bunch of cabinet doors and drawers with this. VERY glad for it because it saved time and dramatically improved accuracy of outcome. I would never use the cheaper alternatives.
Best tool on the market - by ,
5/ 5stars
Sturdy and easy to use. Accurate compared to similar tools I have used before. Recommend 10/10
Excellent - by ,
5/ 5stars
Very accurate and easy to use
Great product - by ,
5/ 5stars
Great product. Sturdy material. A must for cabinet handles or knob installation
Great product - by ,
5/ 5stars
Great product. Sturdy material. A must for cabinet handles or knob installation
Fast - by ,
5/ 5stars
Professional
This is the best - by ,
5/ 5stars
the most accurate
Works great - by ,
5/ 5stars
I have a cabinet shop
Completed first set of doors and drawers without a hitch - by ,
5/ 5stars
Should include more accessories for the price, but works as advertised
Best tool ever - by ,
5/ 5stars
This tool is amazing, I highly recommend even if it just one kitchen. No mistakes made on installing 49 handles.
Cool device - by ,
5/ 5stars
This is a must have. Bought new home and did all my cabinets myself. Saved a lot. Be sure to read instructions and take your time on first one.
Great product - by ,
5/ 5stars
Very easy to use and extremely accurate
Read the instructions - by ,
5/ 5stars
I'm not a carpenter but this truly made my job of drilling holes for handles in my cabinets easy and accurate
Total worth the money, big time saver - by ,
5/ 5stars
I'm a general contractor and I don't know why I wanted so long to buy this template tool for cabinet hardware. All the measurements are very accurate and make it quick to adjust, this has cut the time in half or more for installing knobs and pulls. It also works well for shaker drawers even if the template won't touch the face of the drawer. When that happens I typically take a piece of the toe kick skin put that on the sunken face of the drawer as a spacer. Works awesome
Unbelievable tool/ - by ,
5/ 5stars
This thing saved my life and my cabinet doors
Life saver - by ,
5/ 5stars
Completed 25 kitchen handles. 30 to go. Easy to use and makes it go quickly. Neighbor also used it. I will pass it around. Highly recommend. Only thing I needed my husband for was to dig the battery powered drill out of the garage.
Just buy it - by ,
5/ 5stars
Quality materials, definitely superior to other jigs.
You get what you pay for. - by ,
5/ 5stars
I needed to drill multiple holes for various cabinet door and drawer pulls. The minimal effort to dial in the appropriate measurements paid off with great results. Very happy.
packaged well came quickly - by ,
5/ 5stars
was expensive but my husband (private contractor) now agrees well worth the cost, total time saver especially on his install's of kitchens and vanities. said it cut the job of installing knobs in less than half the time it took before, every knob lines up perfectly from door to door. Time is money. and I bought for him so that is another plus for him
Overall review - by ,
5/ 5stars
Very easy to use, and very versatile. You can use it to line bore cabinet shelves or adding handles and knobs to an entire job. Great tool for a garage shop or beginner carpenter. I also love that the rulers are marked in metric and standard. The actual pieces are a nice heavy duty type of metal (I think aluminum) not cheap plastic. The template for the line boring come in 32mm. I hope this helps anyone. I love this buy and I know it will come in very handy. I can't wait to start using it.
100% Worth it - by ,
5/ 5stars
100% Worth it! Great since of pride and relief getting this project completed.
This is the only one to buy. - by ,
5/ 5stars
Excellent jig. Money well spent. Very well made, precise and easy to use. All metal construction is superior to those plastic imported knockoffs. Big improvement versus other methods I have used over the years. I highly recommend it.
Don't Venture to Cabinets Without It - by ,
5/ 5stars
Absolute must have. Just a homeowner here. I've done pulls/knobs before with homemade templates and sub-par results. This was SO easy. Did kitchen two baths and garage with no mistakes. Very time saving. Purchased at a local wood working retailer to support local business. A few bucks more than Amazon but I was able to see and check it out before purchase. One tip, get the manufacture specs for center to center and if in inches convert to metric. Easier to divide in half for two hole pulls as the jig has very nice metric scale in addition to US inches.
Don't Venture to Knobs/Pulls Without It - by ,
5/ 5stars
Absolute must have! I'm a homeowner dyi guy. Installed knobs/pulls in the past with various templates with sub-par results. This project in our new home involved kitchen, two baths plus garage went flawlessly. Was able to get a local woodworking retailer to come close to the price online, and purchased local. Nothing like being able to see something first before buying and they had a nice display setup to see how it all worked. Tip: Find center to center spec for your hardware, then convert to metric. Easier to hit dead center, the jig has an excellent metric scale as well as US standard scale. I'm now the cabinet hardware mounting fiend of our development ... hey why not make a few extra bucks!
- by ,
/ 5stars
Thank you for your question. Our web store is not set up for international shipping but our main products are on Amazon Canada. We also have several Canadian distributors who are well stocked with our products, feel free to check out our dealer locator under our "Dealers" tab to find dealers in your area.
- by ,
/ 5stars
Thank you for your question, we do not make a longer center piece. If you are looking for more length for the end stop, the TP-ERA allows you to move the end stop out far enough for centering on a 42" drawer front and if you are looking for more length for larger handles, our extension bars allow you to install handles up to 38".
- by ,
/ 5stars
Do you make a longer center piece?
- by ,
/ 5stars
Do you ship to Canada?
Simple to use! - by ,
5/ 5stars
Tool was simple to setup for both single and double pulls. The 5mm bit got dull rather quickly but I had another so not a big deal. Much easier than messing with plastic templates or jigs. Set it, make the holes and you are done!
wow - by ,
5/ 5stars
great product even better customer service very pleased you make me look like a champ. quality materials easy to use great job !!
It made adding 80 new pulls a breeze - by ,
5/ 5stars
While it's pricey, it's worth it. We tested it on a little used drawer to make sure we were doing it correctly. After that, we zipped thru the remaining drawers and cabinets.
Simple - by ,
5/ 5stars
I love this jig, makes life easy!
Accurate and easy to use - by ,
5/ 5stars
This jig is the best there is for precision hardware drilling.I've used others in the past, and made my own.This drilling jig is the only one you'll ever need.Excellent!
The Jig is Up... - by ,
5/ 5stars
...Up high on my list of good purchases. I made the mistake of ordering the cheap plastic version first before I came to my senses and remembered that I almost always regret going cheap. One bad hole is enough of a headache. This is a high quality tool that works very well. You can really fly once you are confident in your settings.I think there is still room for improvement. I would like to see the main ruler be able to slide in and out and lock. That way you can sub in the longer version more easily as needed. I would also like them to include 2 additional sliding guides. This is for the times when you are changing out pulls on drawers that are already drilled and you want a different size. This would allow you to use the inside 2 guides as anchors while adding 2 more for drilling.One tip when using the extensions, there are many drill holes. If you are working quickly (or too quickly) it's easy to drill the wrong hole. Just put painter's tape on the ones you won't be using. This is a great tool. If you DIY and are afraid of doing this yourself, don't hesitate.
Great product - by ,
5/ 5stars
I bought a cheaper model that Didn't have the quality. Should have bought this one from the beginning. It is of much better made and higher quality!
Made in U.S.A.! - by ,
5/ 5stars
Precision instrument, love it! Much, much better than that made in china junk. Worth spending the extra dough for.
Easy to use - by ,
5/ 5stars
Must get super easy to use
Professional project results. - by ,
5/ 5stars
Time saving and accurate installations. Couldn’t have done the self install kitchen and cabinet pulls without it.
Peace of mind - by ,
5/ 5stars
I was really worried about doing all of the handles on our brand new kitchen drawers and cabinets by hand, this jig was so helpful! Worked perfectly!
This is a great Jig, easy to set up, great quality, best of all, It's made in the USA - by ,
5/ 5stars
I liked how easy it was to set up, and how the settings don't move on you during heavy use
Worth it!!! - by ,
5/ 5stars
Best cabinet hardware jig we've ever used, well worth the $
Nice stops. No regrets. - by ,
4/ 5stars
Almost five stars and maybe in time it’ll prove worthy. A little stiff for that small allen but seems to do it’s job well, staying nicely put with a little extra effort. Run the markings toward the drill chuck or you might wear them off. Caution the large surface can quickly damage work material, at the same time it’s a visual aid for square drilling. I’d very much like a bearing to run against work material, perhaps some nylon low friction tape.I think the seller should offer discounted two pack. I bought the imperial set in addition to the 5mm. I’m pretty sure these are going to find separate drill index cases as well as permanent installation for common jig applications.
Great tool. No need to hire anyone and spend $$$ - by ,
5/ 5stars
The perfect tool To install hardware for cabinets.
Finally broke down and it was worth it - by ,
5/ 5stars
I had been looking at this for awhile, but continued to make my own jigs, and then tried a few simple, cheap ones. The meet jig was the first one I thought would work out okay but it only goes up to 6” handles.The versatility of this thing is amazing. The carrying case is definitely worth the extra few bucks, too. The more I looked into it, I realized with all the add-ons, I could replace my shelf pin jig as well as a few other ones I use often enough. It feels expensive for what it is, but if you do more than a few kitchens a year, this will pay for itself in no time. We installed hardware in half the time on first use. It’s durable too. One of our guys already dropped it on a tile floor while having the long handle extension on it and it kept its shape. No bent pieces. The tile was okay too. After figuring in how much I spent on cheap jigs and wasted time making one-time jigs per kitchen, I’ve spent far more than I would have if I started out with this. I got the option with the extension for longer handles, and I’ll be ordering the rest of the add-ons too. As we do more kitchens, I’ll probably get a whole second set to have one on each truck.
Great fixture - by ,
5/ 5stars
This fixture is exactly what I needed to install extra long drawer pulls (21 inches long and smaller). I'm not a professional finish carpenter and this fixture made me look like one!!!Thanks for making this fixture. Highly recommend it,!
The jig is up. - by ,
5/ 5stars
We are in the process of painting all our cabinets and adding handles and knobs to all the faces and this is the perfect jig. Complete accuracy. We highly recommend this jig.
Pricey...but worth it! - by ,
5/ 5stars
Truly a precision tool with multiple adjustments and capabilities. Quality screw locks that hold position throughout the duration of the job.
Worth the money, even for a small job - by ,
5/ 5stars
Some tools are designed well. This is one of them. Makes quick and easy work of cabinet handles.
This tool is very accurate - by ,
5/ 5stars
Primarily for installing doorknobs and handles for our kitchen cabinets. My husband loves this tool. Very precise and easy to use. We can use this for other projects later.
Quality - by ,
5/ 5stars
all i do is install cabinets , as such i install as many as 40-50 knobs and or pulls dailyive been using a 30 dollar version for a while now and was very happy , the bushings are starting to wear and i found this one while looking to buy a replacementthis thing just feels like quality , and everything moves smoothly , and tightadmittedly the price was a bit off putting but the satisfaction guarantee made me pull the trigger , glad i did
- by ,
/ 5stars
Why spend $20k on custom cabinets and then screw them up when putting the hardware on? Or pay the cabinet makers hourly rate to put hardware on? The True Position System is one of the highest quality tools I have the pleasure of owning. First time out of the box and my wife (the designer) and I completed our kitchen in 4 hours and everything is perfect. I will say you need to have some skill and not rush but the systems repeatability is a game changer. I'd recommend buying the complete system b/c you will find a use for all of the parts.
Good and easy to used - by ,
5/ 5stars
Easy to used,I lost my and buy again,good I find the same
Nice Tool / Way Overpriced - by ,
3/ 5stars
This is a great tool. Joints are tight. Easy to measure, did the first project (13 pulls) in 30 min. Case is a must given the preciseness if the tool. My only complaint is the price. Im going to use it on 2 projects for sure (16 + 13 pulls), might do a few more. Still feels way overpriced.
Worked perfectly. - by ,
5/ 5stars
Worked perfectly, very sturdy and saved so much time.
It works - by ,
5/ 5stars
It worked out very well after my being frustrated with using the Kreg version. This sets up a lot better, but it takes little bit to think like the designers of this. You use the middle hole on the main structure and then only one of the slidable brackets. I thought I had to use both slidable and it was not working until I figured it out. I an glad I got it and now I feel more confident about this stuff.
Worth every penny. - by ,
5/ 5stars
Exactly whatI needed.
Works Great - by ,
5/ 5stars
What a time saver. I had over 250 pulls to install on doors and drawers. This device made it easy to drill accurate holes every time. Very easy to setup.
HUGE TIME SAVER, EXTREMELY ACCURATE - by ,
5/ 5stars
FOR YEARS I MADE MY OWN JIGS FOR DRILLING HARDWARE SCREW HOLES IN CABINETS. PROBLEM IS THAT AFTER MANY USES, THEY BECOME INACCURATE. THIS TOOL KILLS!! I DID MY FIRST JOB WITH IT A FEW WEEKS AGO AND IT IS WELL WORTH EVERY DOLLAR SPENT!
You get what you pay for - by ,
5/ 5stars
I almost bought one of the ~$30 jigs, but I decided since I plan on building a new kitchen this year with over $10,000 in cabinets I could afford to get the right tool. If you were only doing a couple of handles, and you were putting them on cheap fiberboard home center cabinets, the $30 tool is probably good enough. But this jig is very easy to get perfect and in the exact same place every time. Pair it with a trigger clamp and a cordless drill and it makes quick work of installing handles.
Cabinet jig - by ,
5/ 5stars
Easy to use.
Amazing product - by ,
5/ 5stars
Couldn't be happier! Made in the USA and it shows!
Outstanding Jig. - by ,
5/ 5stars
We had this one of these jigs for 8 years and finally the drill bushings and thumb screws wore out so I ordered another one. I then ordered new bushings and thumb screws. I got a call from the maker and he asked why I was ordering these, I told him the wore out. He said I will send these to you for free, and he did. Now I have two perfect hardware jigs. I am a custom cabinet manufacturer with over 45 years in business.
🦾 - by ,
5/ 5stars
👍👍
A good tool...but - by ,
4/ 5stars
Ok. I love this hardware jig. It is sturdy, fairly easy to use, and very well built. The case is awesome, and holds everything snugly in place. Having the accurate measure scales is a huge plus and a time saver. My old jig required me to use a tape measure everytime I set it up, or changed from one size to another. The reason for 4 stars...the price. I understand that this is a specialized tool, and it is designed well for the job it's made for. I have no complaints about the tool, case, accessories etc. Just that darn price. I fought with myself on whether to pull the trigger on a fairly high dollar purchase, and I'm happy I did, in the long run. But $300 was a good portion of the price of a new miter saw that I needed after mine finally gave up. If you need a well built, well-designed hardware jig, this is that jig. Just be sure you can justify the price, and be sure you need all of the bells and whistles that come with the higher-priced set.
Over priced/forced to purchase additional parts - by ,
3/ 5stars
Solid build. A little clumsy to use. I was disappointed that you have to spend additional money to purchase a extension arm so that it will be useful on most drawers. I like the case. Need to add tape to avoid scratching wood due to the metal construction. Overall I would recommend because it’s better than other jigs. I install kitchens for a living.
One of my favorite tools - by ,
5/ 5stars
After over 25 years in cabinet making business we finally decided it's enough to mock up templates for handles installation ourselves, and started looking for a jig. First we opted for cheaper model, don't remember name, bright red aluminum jig about $60. Poorly built, did not survive first installation, had no choice but to return it. Then we bought True Position. It was amazing. Accuracy, dependability, ease of use, it's works great without wrecking the brain on calculations. Started with standard setup, but immediately bought all extras, because every day of using it totally proves the value. Customer service is outstanding. One of the screws wasn't threaded correctly, after a short email message we got bunch of replacement screws and free drill bit for our trouble. This is one of our favorite tools in the shop now, and it also makes us proud that this fantastic product is made in United States of America!
Well made - by ,
5/ 5stars
These stops are well made, and they tighten down very tight.
Buena herramienta - by ,
5/ 5stars
Es muy exacta el margen de error es así ninguno .Solamente si el que la usa no encuentra o marca bien la medida .Sevla puedo recomendar para todo aquel que esté en el negocio de cabinet y trabajé instalando closet . Es una buena inversión ,te ahorra no cometer error y no tener que comprar ni un cabinet ni un pantry que pueden costar entre 300 s 1000 dólares ,muchas gracias por esta herramienta
Works Perfectly - by ,
5/ 5stars
I just installed 100+ knobs and cup pulls in our new house. Take the time to get your measurements correct and then use this jig to replicate with ease. If you have never done this before, I would recommend using blue painters tape so you can mark up the cabinet and visualize the install before drilling.
Secure and easy to use - by ,
5/ 5stars
I have had multiple issues with different drill bit stop collars from other places, including some expensive ones. This set is clearly labeled, easy to adjust, and is rock solid in use. Highly recommended.
is precise - by ,
5/ 5stars
I like it!
Good quality. - by ,
5/ 5stars
Good quality.
They stay in place - by ,
5/ 5stars
I'm an amateur homeowner. I purchased a lower priced doweling set that came with drill bit stops. They attach to the drill bit with a set screw that are difficult to set accurately and easy to dislodge. The collar type is easier to set up and stays where you place it. They arrived quickly and have a nice selection of sizes. I am happy with the purchase.
- by ,
/ 5stars
Hello Kris, replacement end stops are available here: https://truepositiontools.com/product/tp-ses-sliding-end-stop/
I’d Buy it Again! - by ,
5/ 5stars
This product delivered on its promise, making easier to drill perfectly centered holes for drawer pulls.Here’s why: I paid a few thousand dollars for a custom wall unit and shortly after the main structure was assembled, covid-19 restrictions broke out and the workers were not permitted to enter our house for the final stages installing pulls and finishing. After two months of restrictions and clothing piling up, I order this product so I could install the pulls and use our new unit. With no experience in performing this level of detail finishing, I was able to install 5 pulls that were perfectly centered in just under 60 mins.The build quality for this product was top notch as it is made in the USA, not the Chinese poor quality garbage that falls apart before the first usage. I would buy it again without hesitation.Only bit of feedback i’d provide (and I’m digging deep for this) is for the money I expect the full kit that has the templates for drilling holes for adjustable shelves.
Works well. Once. - by ,
2/ 5stars
Once you tighten these onto a drill bit, good luck taking them off or adjusting them. When you tighten the set screw the ring clamps down on the drill bit. When you loosen the set screw, the ring stays tight right where it is. You nearly have to damage the ring to adjust it or to remove it.I personally would not recommend this item.
Cabinets handles - by ,
5/ 5stars
Great tool
This is the quality product you want. - by ,
5/ 5stars
I'm an avid wood worker and have a somewhat healthy budget available for tooling and great products. I also have an amazing wife who supports my expensive hobby :) Why is this important in my review? Because this is the kind of item that seems out of price range for what it does.. until you accurately describe the problem.... How do I place these handles on the $4000 cabinets I just built on without messing this whole thing up. The permanence of drilling through the layers of spotless meticulous finish that took you hours upon hours to arrive at. The anticipation of placing that hardware on just right.. and what do you do? You break out that crummy plastic template you bought from Home Depot for 4.99 to accurately place your new gold hardware - are you kidding me!? You get it I think.. this is a WORTH WHILE product that (after a bit of fiddling with) is simple to use, accurate, made with pride, and provides repeatability. And that to me is worth twice the price.
Great Product - by ,
5/ 5stars
Limited use to date preclude further evaluation
Works great - by ,
5/ 5stars
Great for what I needed them for.
Good product - by ,
5/ 5stars
Looks cheap, but does a great job. Thanks
Brilliant tool - by ,
5/ 5stars
perfect tool, exactly what i needed to reduce time and improve accuracy with drilling holes in cabinets and fronts for my kitchen business. As I am a small business, bulky, costly machinery is out of the question. This tool has joined the collection of jigs I use to make kitchens fast and accurate, with all the advantages of space and money savings.
- by ,
/ 5stars
I am trying to get a replacement end stop
Great tool - by ,
5/ 5stars
Borrowed one 5 years ago and now needed one more frequently. Works great. Solid. Accurate. Easy to use.
True Position made in USA! - by ,
5/ 5stars
I've been a Cabinetmaker for most of my life, many times I have made drilling jigs it wasn't until a coworker introduced me to True Position, that I even thought of buying one .. now, I cant live without mine. Its worth every penny in cost!
Excellent and reliable - by ,
5/ 5stars
There was absolutely no slippage from these collars for the drill sizes specified on each collar. I could not get them to work for the in-between size bits.
The best tool In my box - by ,
5/ 5stars
I have installed over 50,000 pieces of hardware (2years or so) with the one have currently in use. It is a bit worn and I need To replace it at some point but it is the best tool that I have ever owned it makes me More money pound for pound than any tool In my box. Jim, Constructive Cabinetry
works well - by ,
5/ 5stars
I purchased this when it first came out and payed $250.00 for it. I've use it many times due to the fact that I own a cabinet shop; the jig makes it extremely easy. The only problem is that it won't do extremely wide handles. Overall very pleased with the purchase.
Fit - by ,
5/ 5stars
Fit, cheap, and labeled with sizes
Very accurate and easy to use. - by ,
5/ 5stars
I have used other jigs before but this one is by far a lot quicker and easier to use.Even though it is a little pricey it has paid for itself many times over in the time it saves.
Just as described - by ,
5/ 5stars
They are amazing!! Just what you need to finish the job right every time
Absolutely awesome tool! - by ,
5/ 5stars
Worth every penny. Did 87 drawers and doors in our new home, without a single mistake. I also purchased the slide extension. Plan to loan the tool to buddies that have to add cabinet hardware in their place because their wife saw our home. Did I say worth every penny?
Extremely accurate - by ,
5/ 5stars
This is the highest quality cabinet door and drawer jig you can buy. I’ve used it to install hundreds of pulls. Super easy to change from one pull to another. Extremely accurate
Worth Every Penny - by ,
5/ 5stars
This guide is well built and accurate. Did 200 handles throughout my house in a little more than an afternoon. Set up is easy. Just be sure to measure twice when setting guide and you cannot mess up using this tool.
Time Saver, Money Maker - by ,
5/ 5stars
This cut my install time in half or more for my kitchen remods. As a professional contractor I know the need for good tools. This one is amazing. I should have gotten the full kit as I'll be ordering the add ons soon.
Great quality and what do it your selfers need - by ,
5/ 5stars
This is a great investment after we spent $20,000 on paint and $3,000 on new hardware. Yes it is expensive however you are not getting a piece of plastic which will work. Easy to set up and very easy to use. It flips so your initial set will work on both doors.
It is great, but understand how to use it. - by ,
5/ 5stars
It is a great tool. Very easy to use.1) Use blue painters tape, so the jig will not scratch the surface.2) Clamp the jig before drilling.3) I was drilling holes in hard maple, so I backed the doors with a piece of plywood.If you don't, the lame drill bit that comes with the jig will rip pieces of wood from the back.I found it easy way, I always drill on a scrap wood first to make sure that everything is measured correctly.4) I also purchased TP-2312-NC separately for long handles. I had a 320mm handle that I needed to install on a wide drawer. The directions are stupid (just read them and see pictures). I did not follow them. Instead, take into consideration that holes on extended rulers are 32mm apart. Just use this info to center the jig on the drawer and that's it.5) I am OK with the price. It took me a year working a few hours per week to build my wife's dream kitchen. I did not want to ruin it by saving a few bucks.
It's a great tool, but there are some caveats - by ,
4/ 5stars
I would still strongly recommend hand measuring; for some reason when I tried using the 'center' according to the tool it was off a little. Otherwise, I think this jig is pretty good. Once you're done setting it for the first time, it saves you a ton of time by giving you consistent drill spacing from the edges of the cabinet doors. I drilled the handles for 23 different cabinet doors and installed handles in about an hour, and the results were great.However, there are a couple of big problems I have with this tool. The first is with installing anything on drawers. The instructions say to mark the center of the top of the drawer with a line and then just line up the notch on the 'Large Stop' with that line. Why didn't they just put a hole in the Large Stop so can you line up your drawn line with hash marks outside the hole? It matters because when you push the tool flush with the face of the cabinet, there's a chance for it to move. I would almost recommend buying the more expensive version that comes with the arm extensions to prevent this, but I'm not sure if that's worth the extra $110.The second problem I have is with shaker cabinet drawers. I would strongly recommend putting a shim or something behind the tool before drilling. If you don't, when you push the tool against the drawer, the bottom (where you drill) might swing in, and you could drill at an angle. The arm extensions would also prevent this from happening.Otherwise, though, it's a great tool.
Machined well! - by ,
5/ 5stars
Useful depth stops for twist bits!
Money Well Spent - by ,
5/ 5stars
This is an outstanding tool and worth every penny if you are a professional but especially if you are a novice. The easy set up and accurate repeatability make production fast and easy. It will save you time. I misordered and got a second one. My experienced professional trim carpenter used this tool for 5 minutes and took my extra one as payment. You can set up a drawer stack in a minute and drill all the holes and move on. If you are a DIYer with a bunch of these to do this investment will save you expensive refinishing/repair costs and you'll be happy with the results.I am an experienced DIYer. The first time I got it out it took a bit of time to set it up and trust it since mistakes are so expensive. After reading the instructions carefully checking and double checking, it was dead on accurate. I installed 31 knobs and 31 handles in a matter of an hour or 2 tops. The pulls ranged from 5' up to 22' wide. It is awesome. Money well spent.
Accurate - by ,
4/ 5stars
Definitely works. Ideal if you’re using it regularly like we do. If not i would just get a cheap plastic one.
High quality tool! - by ,
5/ 5stars
We are constantly refinishing existing cabinets, and some customers want new knobs and pulls with different spacing. Mostly we use a Kreg jig, but this customer wanted 2 different sizes and only one of them was within the capabilities of the Kreg jig. There were plenty of options for similar products at far lower prices. The reviews were mixed, but most said the tool quality was poor.I wanted something accurate and that would last a while. Yes, I paid more for this unit, but I know I will get many years of use out of it. Scales are easy to read and are accurate. Tool is made of aluminum and seems very well built. I was able to quickly setup the jig and drill 40 doors and drawers in about 2 hours. It would have gone much faster if there weren't 3 different sizes! Basically it paid for itself with the first project. Some of the cheaper kits came with a bag...this one comes with a plastic molded case to protect it.It does come with a drill bit, but plan on buying a new one if you're going to use this professionally. It just wasn't very sharp and took a little effort to go through 3/4' oak. Drill bits are cheap and can be replaced easily. Other than that, the tool will last for years if well cared for!
Works great - by ,
5/ 5stars
This item was easy to use, worked great, and is made of tuff material. I’m glad I bought it but it was a bit pricey
Drill bit stops. - by ,
5/ 5stars
A new design for an old problem. Worked wonderfully!
Good case - by ,
5/ 5stars
Fits perfect. Bought a jig second hand with no case ordered this one and it is perfect.
Great hard case - by ,
5/ 5stars
Perfect hard case for my handle jig.
it does what its supposed to do - by ,
5/ 5stars
it is everything the manufacturer says it is
it does what its supposed to do - by ,
5/ 5stars
it is everything the manufacturer says it is
Recommend - by ,
5/ 5stars
Expensive but cheaper than a miss drilled cabinet door. Very accurate and easy yo use
These drill stops do the job - by ,
5/ 5stars
Basic tool for a basic job
Worth the extra money if you're going to use it a few times - by ,
5/ 5stars
This tool is easy to use and very accurate and tight. A little pricey for the weekend warrior, but worth every penny if you do a lot of kitchens and bathrooms.
Easy to purchase arrived on time - by ,
5/ 5stars
Perfect addition to my handle jig
Great bits - by ,
5/ 5stars
Great bits sharp and durable
Get some upgrades for the jig to make it better for doors and drawers with applied moldings - by ,
4/ 5stars
I have two of these jigs and install hardware for a living. I am running in to problems with cabinet doors and drawers that have applied molding to the front of them. My problem is on drawers the big stop only hangs over 3/4 of a in.on both sides and with the routed detail on the drawer and the applied molding the stop falls off the drawer. If there was a way to make the big stop an 1- 1/8 to 1- 1/4 on one side only that would solve my problem of it falling off the top of the drawer. Then I have issues with the sliding drill guide because of the applied molding on the front of the drawer, as it puts my guide a 1/2 in. away from the drawer front. If we could make the sliding drill guide thicker in the back only by 3/8 of an in. and a 1/4 in. shorter than the original guides as it hits the molding on the door front and interferes with getting the holes center where they need to be. these can be sold as a accessory and I would be your 1st customer. please consider this as I am running into a lot of doors and drawers with applied moldings. thank you Glen. PLEASE HELP ME AS I DO THIS ON A DAILY BASES
Very good product - by ,
5/ 5stars
Badass. If you’re scared, buy a dog. If you install, buy this.
Extremely accurate - by ,
5/ 5stars
Does exactly what it says and extremely accurate....I opted for this one because I don't do cabinets alot so the more expensive one was not worth it to me. This one can do large drawers too but you have to think it thru a bit....
It's the original and best - by ,
5/ 5stars
Best tool for cabinet hardware installation
Worth the money - by ,
5/ 5stars
Amazing tool dont know why I waited so long to get this. My business is a cabinet installer for big box store and been installing for many years this little gadget made this 55 cabinet with over 100 handles and or knobs a breeze. Built strong and measurements are accurate..... Love it!
Great Case - by ,
4/ 5stars
Nice case, good hinge.
FLAWLESS! - by ,
5/ 5stars
If you're a cabinet installer or something similar, definitely this is something you need if you want to be a 100% accurate and want to save a lot of time as well. It comes with easy to follow instructions and a nice case if get the whole package. Even though the price is a bit high, you won't regret it once you use it. I recommend it for professional results.
Not worth the money - by ,
3/ 5stars
Great tool,... value for money hell no, did even come with the extension, real waste of money
Just buy it! - by ,
5/ 5stars
With the money. Allows for fast installs.
Lightning-fast installations near effortless setup - by ,
5/ 5stars
Yesterday I installed variable sized hardware on 52 drawers & 20 Doors with this product in 4 hours and 20 minutes. That is 3 minutes 40 seconds per piece of hardware.I knocked it a bit on accuracy. Because the set screw can slip over the course many drawers. You have to check it every three or four drawers to make sure it stayed the same.
Best investment - by ,
5/ 5stars
Absolutely perfect.I’ve used other products. I’m a contractor and specialize in kitchens.If you are debating on the purchase, do yourself a favor and buy.It actually is fun to figure out and use.
These are a must have if you own the True Position cabinet hardware jig. - by ,
5/ 5stars
The bits wear out if you are drilling hardwoods, so stock up.
You won’t be disappointed. Wow. - by ,
5/ 5stars
I’m super impressed by the quality of this tool. I used it with incredibly accurate and repeatable precision. As a DIY guy, this set put me at ease drilling holes in my expensive new walnut cabinets.
It works! - by ,
5/ 5stars
I'm replacing the one I had. Some guy on the job site wanted it bad so I sold it to him. Work's great!
Everything was good - by ,
4/ 5stars
Work everything was good
Awsome tool - by ,
5/ 5stars
Wish I knew about this tiol long ago, what a time saver
Nice - by ,
5/ 5stars
Glad I bought this will pay for itself the first job considering two cabinet doors would cost 200$
Time saver ! - by ,
5/ 5stars
Easy to use ! time saver !
worth it - by ,
5/ 5stars
I bought this and my friend bought the cheap knock off. His is already broken and won't stay on it's settings, while this baby works like a charm every time. I's easy to use and well made.
Works great! - by ,
5/ 5stars
Well, after buying two cheaper plastic guides over the past years and ending up with damaged doors, I finally broke down and paid more for this device. Wow, what a difference! Works great with accurate repetition. I clamp it on after positioning. It's worth the cost.
Great tool for doing your own kitchen cabinets. - by ,
5/ 5stars
I really love this tool. We're installing our own kitchen cabinets and needed to install handles. The first jig I purchased was from a home improvement store and was around $25. The problem I had with it was that the holes were not wide enough for my handles so I looked at online reviews and went ahead and purchased this one. Yes, it's a chunk of money but my handles look 100% spot on and so worth the money. This tool can also be used for other handyman type stuff since it's such high quality.As for the customer service from the manufacturer, I was not impressed. My first order was lost in shipment (it never left the delivery companies hub) and I received an email from Amazon letting me know the order was being cancelled. So, I placed a second order. Now I had to deal with the refund for the 1st order. Amazon told me as soon as the seller agreed to cancel the order the credit would be issued back to my gift card I used. The seller refused to cancel the order, I was literally begging them for 3 weeks and they kept saying that they had received no money so they didn't need to cancel. After calling Amazon 3 times (finding a phone number is not easy) I was finally able to get someone in customer service to understand the issue and issue the credit back to my gift card.
Just what I was looking for - by ,
5/ 5stars
Needed a case for my pin nailer and this worked perfect. Pin nailer was fairly cheap but I did want to put it in a case and this case was the right price and a good quality. Was easy to lay pin nailer down on the foam and draw an outline on the pre-cut 'foam cubes' which I then removed so the nailer fit snugly into the case. Will be buying more cases for some of my other tools.
It works it’s durable quick and acurate - by ,
5/ 5stars
It’s great
I won’t do cabinets without it! - by ,
5/ 5stars
easy to use, very accurate
Works well. - by ,
4/ 5stars
Nice product. Perfect for for my needs. Cubes cut outs could be smaller.
USA - by ,
5/ 5stars
Built in the USA, do I need to say more. Expensive but definitely worth it.
Professional grade product - by ,
5/ 5stars
I'm a cabinet refacer. Most people aren't familiar with this kind of work, because it's somewhat new. I've been doing this job 3 years now. My company expects precision, and quality work with consistency. I've been using the true position for 3 months now, and let me tell you that it's the best product on the market. I was skeptical at first before I tried it. I just measured by hand the past couple of years, because I didn't trust anything on the market. The doors I work with is too expensive to make a mistake. I can admit it was a little confusing to me at first, but by the first job I used it on a job I had it down pat. I have made mistakes with it, but mainly by my fault. I work with a lot of drawer sizes, and handle sizes on just 1 job. You have to pay attention to that if you use this product and do cabinets for a living. The first time I used it I wanted to go to town on drilling, but make sure you know the size of everything. I believe it saves me a hour on every job on drilling, and measuring. Maybe more, but the consistency is what counts. Every handle lines up perfectly without any adjustments compared to my measurements when I did it by hand. I definitely recommend this product if you do cabinets for a living.
Must have for the profesonls - by ,
5/ 5stars
The best tool ever for knob and pull installation. I suggest going for the full kit and case. Everything an installer will need. I have to say at the price point this sells for I recommend it on for the serious or professional .
Working fine - by ,
5/ 5stars
Working fine!!
Great tool. Don't waste your money on the knockoffs unless you want to be inaccurate. - by ,
5/ 5stars
Great tool.
The best - by ,
5/ 5stars
This is the best for its purpose. Much better than the Chinese knock offs. It doesn't bend, so once set, its accurate with every handle installed.
Quality - by ,
5/ 5stars
Product is higher quality and increases productivity exponentially. Worth the extra money if you plan to use daily.
Perfect - by ,
5/ 5stars
Perfect tools for cabinets
Expensive but Works Great! - by ,
5/ 5stars
Works Great!! Really came in handy when we refaced our kitchen cabinets! On the expensive side but saved a lot of headaches! High quality. Very durable.
Pratice - by ,
5/ 5stars
Excelente
Quality-made tool - by ,
5/ 5stars
Easy to use, very accurate. a bit pricey, but worth it!
I would recommend this jig for anyone - by ,
5/ 5stars
So glad I purchased this jig I mean I'm not a professional contractor but it made the job a lot easier, faster and the kitchen look nicer
great tool - by ,
5/ 5stars
makes life much easier when installing handles
Great tool. Worth the high price tag - by ,
5/ 5stars
Super expensive but super easy to use. Had some knobs installed in five minutes. Perfect on both doors. Great tool even for a simple task. Looking forward to putting it to good use on some cabinets.
Well worth the extra price. Well built not a cheap imitation. - by ,
5/ 5stars
Well worth the extra price. Well built not a cheap imitation.
Does the job that cheaper ones do. - by ,
2/ 5stars
I install hundreds of handles each year. This does what it's intended for but there are cheaper units out there that do the same thing. I give it a one star for the case. I will take the blame and I should of contacted the seller first but I went off of other reviews and thought this to be a much better quality. Don't spend this amount.
Works as well as one would hope - by ,
5/ 5stars
Though priced a little higher that I would have liked, this jig is unquestionably easy to use and accurate every time. The time saved does help justify it's price. Ideally one would want to have it for more than a single kitchen's worth of cabinets but given the cost of cabinets and the results of misdrilling some holes I was happy to but it.
Good simple DIY tool for a big job. - by ,
5/ 5stars
Simple and accurate DIY tool for a big job. I used it to install 56 various knobs. Wife gave me complements for results. Before buyin this tool, I did ask estimates on such job by a contractors, and by buyig this tool I'm actually saved money.
Good - by ,
4/ 5stars
Good product
QUALITY AND ACCURATE! - by ,
5/ 5stars
Worked like a dream. This jig allowed me to slay a dragon that I was dreading to tackle... I added the extension and the results turned out like a pro’s work! The price is high and I know how tempting it is to buy the cheapest product with somewhat good reviews.... but, buy American and support a great company that produces a top quality tool! After drilling over 40 cabinet doors and drawers I seriously doubt that anything less than the quality jig that this is would have been able to hold up and remain unfazed. Seriously, I was getting a little cocky less than half way through my project because this jig was that good at getting the job done accurately! I cannot recommend this enough!
Outstanding quality and 1000% as advertised! - by ,
5/ 5stars
Adding this extension on to the the Original Cabinet Hardware Jig allowed me to drill the hardware mounts for over 40 cabinets in my home... all in less than an hour! I am a 100% first time DIY’er and this got me to complete my project with the results of a pro! Bought American made product and saved hundreds by doing it myself. Even considering doing this as a side job for hire... lol.
CAN’T ADD THE END STOP ON THE JIG FOR A 22” DRAWER FOR A 13” LONG PULL - by ,
3/ 5stars
Love the concept and for the long handled pulls on tall cabinet doors worked great. When trying to use on install of 13” pulls on a 22” X 5” drawer front there is no way to attach the end stop. So trying to hold flat and steady on the center line is very awkward ard difficult. It’s so difficult to hold completely flat on drawer front edge, it has a tendency to slant back while holding the jig on the top of the drawer edge. If the large stop were slightly bigger in order to go a little further back on drawer edge would most likely correct this problem. It would probably work better if the drawer didn’t have a raised panel drawer front. Should have better instructions. The price should be a little more reasonable.
You get what you pay for - by ,
5/ 5stars
Works great does what it is supposed to do easily repeats handle locations so everything comes out the same
Terrific - by ,
5/ 5stars
Although a little pricey, it's quality is worth it.
Presision - by ,
5/ 5stars
I manafacturer and install high custom furniture and cabinetry this product made my job extraordinarily easy.
Presision - by ,
5/ 5stars
I manafacturer and install high custom furniture and cabinetry this product made my job extraordinarily easy.
Precision - by ,
5/ 5stars
I install and manufacture high end furniture and cabinetry. This product made my job much easier
I loved this item - by ,
5/ 5stars
Like
Stop pinch go - by ,
5/ 5stars
As Expected
Muy bueno - by ,
5/ 5stars
El producto
Awesome tool - by ,
5/ 5stars
I liked this tool work good.
Awesome tool - by ,
5/ 5stars
I liked this tool work good.
“Happy Tool Man” - by ,
5/ 5stars
This is a “Top of the Line“ product! My husband installed over 50 items with this tool in no time. He’s a stickler on perfection when it comes to this type of work and this tool made him one “Happy Tool Man!” The settings are right on target!
Great tool but it should have always came with the hard plastic case - by ,
3/ 5stars
Great overall but I find it absurd that I was charged this much and they gave me a crappy cardboard case.
Protects jig - by ,
5/ 5stars
Works as described.
Needs to be bigger - by ,
4/ 5stars
Loved the tool just wish it was bigger. It was very expensive and my pulls were 13”. I had to fabricate an extinction in lo of spending a lot of money for the extinction kit.
Perfect Tool - by ,
5/ 5stars
This is the best item for cabinet work. Love it. Should have bought it years ago.
Better tutorial needed - by ,
5/ 5stars
You need to do a better job on your tutorial videos under different circumstances
Worth every penny. - by ,
5/ 5stars
As a mechanical engineer I’m always looking for things that are extremely precise .... make my job easier .... this tool fits the bill. I’m not one to typically review but I am very impressed with this tool and wanted the creators and other buyers to know.
Top Product - by ,
5/ 5stars
got this late August 2019tested it on a few cut pieces of plywoodworked a treatunfortunately never got to use on the installed cabinetsjobsite was broken in toall my tools were stoleni will eventually purchase this again
Great Investment!!! - by ,
5/ 5stars
Huge time saver...well worth the investment!
Good tool for the price - by ,
5/ 5stars
A little bit tedious to set up, but works like a champ.
Best hardware jig on the market - by ,
5/ 5stars
If you do a lot of different size hardware this product is worth the money!
Worked well - by ,
5/ 5stars
Having made of aluminum stops mean you can drill out with your bit and have perfect fit that made for great job.
Very nice case - by ,
5/ 5stars
Much better than the cardboard box the tool came in
Works great - by ,
5/ 5stars
Best jig on the market period. Buy it and replace the drill bit with a festool brad point. Also I did a little detail work on the set screws by sanding them flat so as not to scar the guides and create memory
The Great Pretenders. - by ,
5/ 5stars
The good folks at True Position pretend that there is no such thing as a shaker style drawer front. I don't argue with the fact that it's a tough problem. I suppose that humans aren't smart enough to solve a problem like that. If it was solvable I guess they would have solved it by now. But they can't so they just pretend.What if I promised that the depth of the panel below the rails and styles will be exactly 1/4' and never very even by a single angstrom?
Nice for larger drawers and cabinets. - by ,
5/ 5stars
I ordered the TP-1935 because I had larger/wide handles to install and none of the cheaper models would would do more than 6 inches that I could find. Easy set-up and accurate. (I just had a few handles to install so time will tell if it holds it accuracy.) it was a little expensive but if it holds its accuracy then it will be worth it.
The PERFECT case - by ,
5/ 5stars
The perfect case. The perfect fit. This is exactly what I needed. It fits everything so perfectly. I love that I can make it fit to suit my purposes by just adding or removing the inner padding. This is perfect for a dremal, or a staple gun or a hex die cut set. It’s so versatile and sturdy. I don’t know any other case that come close. I intend to buy at least one or 2 more. It is exactly what I needed as an artist and someone who frequently works with tools of all sorts. It’s excellent! Definitely recommend!
great time saver - by ,
5/ 5stars
i installed (40) 7 1/4' pulls, finished in under 4 hours would have been quicker except I kept checking my measurements if your going to spend several thousand dollars on cabinets this is well worth the money. Easy to understand instructions and very easy to use without help. I was able to use on recessed drawers.
Supposedly supposed to fit the tool but doesn't fit the bill very well. - by ,
3/ 5stars
Things are hard to get in and others are just laying loose inside. Looks like not a whole lot of thought went into the development of this accessory. The tool that goes into it though is class A.
One of the best I’ve used - by ,
5/ 5stars
These collars stay put! No more sliding up or down the drill bit shaft. Well made!
Good tool - by ,
5/ 5stars
Product is expensive but when you consider the cost of a house full of cabinets it is well worth the cost. Great easy to use tool.
Just what I needed. - by ,
5/ 5stars
They work perfect as replacements. Tighten nice.
Why did I wait so long to get one - by ,
5/ 5stars
This is a solid jig, not cheap metal and sturdy. Took me a 1/4 of the time to install over 60 handles and pulls. I use it for all kinds of jobs now when I can.
Well worth the money if you’re planning on installing several pieces of hardware - by ,
5/ 5stars
Bother this because I plan on building severa cabinets. Easy to understand and use. Very accurate. I also let a family member use it to install hardware in his rental kitchen.
Better quality than expected - by ,
5/ 5stars
Better quality than expected
Accurate and repeatable - by ,
5/ 5stars
Buy once, cry once. It will cost a lot more to replace a miss drilled door that it will be to buy this jig. Very accurate and repeatable knob and handle placement.
Perfect Hardware 100% of the Time! - by ,
5/ 5stars
This is actually my second TP-1934 Cabinet Hardware Jig by True Position Tools. We used the first one so much the the ferrules actually wore out and the accuracy of the jig was compromised.For this second jig, we have decided to use the jig to only mark the holes with a drill bit by barely drilling into the wood and then removing the jig to finish the hole. It may slow us down a little bit, but it is definitely worth it to maintain the quality and precision of this tool! The jig comes in a plastic case which protects it whenever it is in transport between job sites.This is by far the BEST cabinet jig on the market in my opinion! I would highly recommend this to anyone in the market for such a tool!
Makes installation of pulls quite easy. - by ,
5/ 5stars
I had 52 pulls to install on drawers and cabinets. I hesitated purchasing this due to the cost. I am so glad I did. This tool kit will give you perfect placement and repeatability. I did a few of the drawers, measuring and marking the center. And then decided to also order the TP-ERA Ruler Attachment. My advice, just do it. No regrets.
Highly recommend - by ,
5/ 5stars
Love it! Worth every penny.
Save time. - by ,
5/ 5stars
Makes everything so much easier saving me a lot of time.
Great - by ,
5/ 5stars
Great case for storing small vehicle diagnostic eqipment.
Great case - by ,
5/ 5stars
It's a great case for indoor use. I've been using it for a year now to keep my NEC handbook (which costs 220 dollars) safe when stored in my work van. Basically if you need to protect a textbook or something textbook sized it's a great solution.
Would not buy again... - by ,
1/ 5stars
I’m not a contractor, nor a finish carpenter, but have multiple rentals properties and have installed cabinets and pulls/handles a dozen times. Decided to buy this for my own new home to install 80 handles. Was very impressed with the reviews and initially when the TP135 arrived.However, things went downhill from there.I agree with others that the included drill bit is laughable, and they would be better off just not including it.Ultimately I ruined 2 drawer fronts and 1 cabinet door, which will cost me $300 to replace.On the first drawer, the horizontal slide loosened and got out of alignment. I cranked it down as much as possible (without using vise grips- which would have damaged the soft metal). After tightening the locking screws after each drawer (which shouldn’t be necessary), I wasn’t at all confident in this very expensive tool. It was certainly slowing the process down. Finally I ended up taping the horizontal slides so they wouldn’t move- again...this is a $300 tool.Door 1 was ruined as the vertical clamp loosened- guess I should have figured that so I ended up taping it as well.Drawer 2 was ruined as somehow the metal of tool was scored ( the metal is very soft) and scratched the front of the cabinet.The retaining screw(s) literally would fall out from the minimal vibration of my Ryobi cordless drill.I installed all handles in one day, but will not use this again and prefer to go a much cheaper option that will get better results.
Calidad - by ,
5/ 5stars
Perfecto y práctico
Excellent jig, heavy duty, - by ,
5/ 5stars
I don't write reviews until I use the product I purchased. This an exception, I came out of retirement to remodel kitchen again, because I love my work. . I thought I'd save myself the time and trouble of making numerous jigs for cabinet hardware. $200.00 later, this is one heavy duty adjustable jig with options to upgrade. Using it once or twice will pay for itself.
Accurate, Solid, Consistent - by ,
5/ 5stars
I used this jig to mount 35 pulls ranging from 8 to 24 inches in both horizontal and vertical positions. The jig was easy to use and maintained all settings without flaw. I hope this helps someone else make a decision to purchase this particular product.
Amazon precision tool - by ,
5/ 5stars
My wife and I are pretty handy around the house but have never tried installing cabinet or drawer hardware. We just moved into our new home and elected to install our own hardware. The builder's contractor wanted $3 per hole plus the marked up hardware. I was able to buy the exact same stainless steel hardware at half the price. The job required 150 cabinet and drawer pulls to be installed. This jig made the job so easy. We had several different drawer types but the tool handled each one with ease with the added extension for the larger drawers. But overall the cabinets and drawers look professionally done. We completed the project in about 6 hours. Very pleased.
Precision Tool and easy to use - by ,
5/ 5stars
My wife and I just finished installing all of the cabinet and drawer hardware this weekend. About 150 handles and knobs. The extension made the job easy on the longer drawers. We did have to buy some longer screws than what was included with the cabinet hardware but that was a minor issue and no fault of the tool. Precision and accurate.
The bestest jig - by ,
5/ 5stars
I purchased this jig a few weeks ago and have been using it now regularly. It is awesome! Once you learn how to set it up for various applications (such as single hole knobs or handles with two holes or wide drawers) it becomes faster and faster to dial in. The results are fantastic! Perfect hardware drilling completely repeatable and reversible. Cuts hardware installation time dramatically. Sometimes you have to spend some money to make more money and this tool is the perfect illustration of that concept. I'm glad I'll never ruin another cabinet door or drawer and delighted with thew speed and accuracy this tool brings to a job that requires real precision. Much better than my previous shop/site built jigs and far superior to my old retired store bought jig. It's the bestest!
Great jig, But a bit pricey! - by ,
4/ 5stars
Minus one star due to hefty price tag. Far better than the cheap Chinese made knockoffs though! Really speeds up the job of installing hardware and in my line of work, speed and accuracy are number one!
Perfect match to those in the kit! - by ,
5/ 5stars
I'm happy to report that these are the exact ones in the handle installation kit. Work perfectly. Update: They came in a ZipLoc style bag and I added one to my kit, gave my buddy one for his kit, and then lost the other 8 while they were still in the bag. Be smarter than I am and put the bag right in your cabinet handle drilling kit!
Excellent quality and usability. - by ,
5/ 5stars
Very well made, simple setup, easy to use. My only caution is to make certain between each door/drawer that no screw on the jig has loosened and allowed any part of the jig to move or you will end up with holes improperly drilled. I used the jig to install hardware on 78 doors/drawers in very little time with zero problems.
High quality at a high cost. - by ,
5/ 5stars
This is expensive, but it will deliver a near guaranteed result which if you have many cabinets to do will help you do a high quality job reasonably fast. The ability to flip the device and do the opposite cabinet door is another time saver. I do believe you need to ensure the screws stay tight so the device doesn’t slip. I had read that in a review and this ensured the screws were tight. I have had the plastic versions from Home Depot and those are fine for a couple doors, but the pre-drilled holes don’t always line up how you need and you need to triple check to make sure you don’t make a mistake and it doesn’t slip. For a few cabinets that’s probably ok, but not for 10 or more.
Jig Tool - by ,
5/ 5stars
WOW! I can’t say enough about this great jig tool! You talk about making a difficult job easy! We installed every bit of hardware in our new house ourselves. And continue to use it for many other jobs around the house! It is worth every penny, highly recommend!
Time saver for a pro - by ,
5/ 5stars
I install hundreds of sets of hardware over the course of the year. My previous method was to make a template for each job, but most jobs have varying drawer front heights and various handle widths so it wouldn't be unusual to make 3-4 different templates for each kitchen. I'd save them but it seems the exact same setup was seldom used again.PROS: Very well made - this is a precision tool made in the US. Quickly sets up for various knob heights, handle widths and different drawer heights. Comes with a blow molded case to keep everything together.CONS: (Not really cons, more like 'things to know') It's not inexpensive, but it's a quality tool. The enclosed bit is not the greatest. It's okay, but will smoke and burn its way through a maple drawer front. The 5mm hole is a little larger than I would normally use so there is a little play when using an 8-32 machine screw - not bad but you may have to fine tune the long parallel door handles. I haven't yet used it on a recessed panel Shaker style drawer front. There will be some distance between the bushing guide and the surface to be drilled on that drawer style, but I think the fit between guide and bit is precise enough that it will work ok,
Good purchase - by ,
4/ 5stars
Perfect!
Buenísimo - by ,
5/ 5stars
Falta que le incluyan un extra stop no sean codos
Expensive but worth it... - by ,
5/ 5stars
Easy to use
Un poco caro pero exelente - by ,
5/ 5stars
Un poco caro pero exelente
Nice jig, priced too high. - by ,
4/ 5stars
This is a very nice jig. I build custom cabinets and have used many jigs in the past and this is the best so far. My only knock on it is the price. It’s too expensive for what it is. Also the case is pretty cheap and will most likely break sooner than later.
Nice quality - by ,
5/ 5stars
As expected
Not fool proof! - by ,
5/ 5stars
Love this tool. Had 128 door and drawer pulls to install. Once set, process was quick and precise. However, when changing over from doors to drawers and/or the size of handles pay attention as it can be easy to miss a setting. That said, this is a quality built product especially suited for tradesmen.
No good for me. - by ,
1/ 5stars
Sent it back. I couldn’t get the extension to snap into the receiver, and there was limited space for any “extras” I might have wanted to store with the jig.
Pricey, but works great. - by ,
5/ 5stars
I was already happy with the basic jig, and this made it even more convenient!
Value add - by ,
4/ 5stars
Value plus use it for my whetstone
Works great - by ,
5/ 5stars
Great product and easy to use
Works like a Charm! - by ,
5/ 5stars
Works perfectly for the small time diy’r who doesn’t have a workshop or drill-press. I made some shelves and I only wanted the holes 1/2” deep on a 3/4” board (so I could fit in dowel-rod legs)...worked perfectly just like a charm!
Excellent tool - by ,
5/ 5stars
Mounted cabinet hardware throughout kitchen. This tool made a huge difference. Very well made. Works exactly like they say.
TP-CASECHJ CASE - by ,
5/ 5stars
It works perfect storing the template parts, everything fits
Reliable drilling kit, but missing a clamp...in my opinion. - by ,
4/ 5stars
First of all I’m not a super handyman, just wanted to install cabinet door pulls in our kitchen and bathroom cabinets. I have a couple of wide cabinets and after a lot of research I opted to buy this jig since it was the only one long enough for the job. Even though I wasn’t thrilled about the price all the other buyers seemed pleased.When it was time to start to use the jig I went ahead and measured three times to make sure I got the correct measurement and that all cabinets were the same. I configured the jig and I started with a door pull on a wall cabinet (rookie mistake). After drilling the first hole, I noticed that the jig had slipped and it was no longer on the edge of the door panel :(. So I had to reconfigure the jig with the new distance using the first hole as the guide to position my second hole. After that it was very repeatable even though everything was seated a bit lower than desired. I’m summary, I’ve only done the cabinet doors (drawers are next) and I’m pleased with how easy it is. My only suggestion to the company is that for the price they should include a clamp or at least make note of it on the instructions. I’ll add more information when I do the drawers and use the extension.
Saved me time - by ,
5/ 5stars
Saved me so much time!! Love this tool. The only thing is i would like is to make it longer for drawers. .. but I think you need to buy the extension.
Spend money to make money, this tool does it well - by ,
5/ 5stars
Someone was actually thinking of the tradesmen when they designed the this
Smells awful, foam cubes too large - by ,
2/ 5stars
Smells like vomit. Tried washing the padding. The foam cubes are too big to hold any small accessories for the tools. Maybe a year in the shed? Smells beyond toxic and gross, made my tools smell bad somehow.
Precise, well made jig - by ,
5/ 5stars
The best jig I had ever used for cabinet installation work. I try minimizing the fabrication on the job site but it does happen regardless and with this jig it's made tons quicker. If you decide to buy an expensive jig, make sure to buy the largest kit offered. You are spending the money as it is, a little bit more - and you got a very well crafted toolkit. Takes a little getting used to if you had never used a kit that you had to set up but honestly, it's not rocket science. Anything you use in the shop needs to be set up. Try working with a Leigh Jig to make dovetails - you know what I mean.Instructions were included with pictures for everything. Easy to follow. Common sense, really. The case is sturdy plastic with little wasted space. The jigs are aluminum with inserts for the drill bits that can be replaced if worn out it seems. A drill bit with a depth bushing is included so all you need is a drill/hammer drill and a tape measure with a pencil to install handles/shelves.Would buy again if ever needed. Good tools cost money and this is what made in USA means.
True Position Tools TP-1935 Cabinet Hardware Jig - by ,
5/ 5stars
Product is excellent and scales are accurate. A very high quality product. Would buy again!
Replace foam - by ,
5/ 5stars
Decent case. Pluck foam had a strange odor so I replaced it.
These are the best collars I have every bought. - by ,
5/ 5stars
These collars are great. I have several steel versions because I am ever hopeful they will not jam or break. These aluminum ones seem to have more give so they slide well on the drill bit but then tighten down very well and hold. I plan to buy another set because many times I need multiples of the same size.
Nice Jig - by ,
4/ 5stars
The jig itself gets 5 stars. For me, making a jig per job, isnt always the available option bc hardware is rarely on site during install which either leaves me to put out tools to make one or the old tape measure and pencil trick. That being said this is great for me. Worth the money IMO.Two things to note where there is room for improvement. Although I dont have an issue with maring cabinets during drilling I can see how it could happen. Small felt pads should be added to contact areas. Not to much to ask considering the price of this. Also the drill bit included is absolute trash. Again for the price of this unit they could have cut 4 more dollars from profit to add a better bit. All in all I'm happy with the purchase.
Good for laptop, or other things - by ,
4/ 5stars
Using this for transporting my knives and its pretty good. Would recommend
Good product - by ,
5/ 5stars
I liked that it's easy to adjust,it's fast ,it's all in one place. I would've liked if it had more length but besides that it's a great product.
Great - by ,
5/ 5stars
fast shipping. Excellent product
Great value. - by ,
5/ 5stars
Great case for some precision tools I have. The interior foam worked very well.
Great tool! - by ,
5/ 5stars
This is a great tool, well worth the money. I was able to drill new handles for my mom’s kitchen.
Amazing - by ,
5/ 5stars
This jig exceeded my expectations. Spend the money you won't be disappointed. Saved me so much time and all the handles are all even. I let friends use it and they raved about how GREAT it worked also.
Terrific! - by ,
5/ 5stars
I'm very happy with this purchase and will buy another if the need arises. This $20 box provided a safe container for $250 worth of tube bending and flaring tools and their accessories. Now I have a 'grab it and go' kit for tubing jobs. Two levels of foam (one thin, one thick) are die cut in 3/4' squares so you can quickly pull out the ones where you want your tool(s) to sit. The foam can also be cut with a sharp knife. The kit came with the thin foam on top, but it should probably be swapped with the thicker layer. That way a thin layer exists on the bottom to lay your tools onto and the thicker layer can be cut to form around them. What ever works. Good quality, should last forever.
Speed & Accuracy - by ,
5/ 5stars
When you’re wanting to get done as quickly as possible, this is the ticket.
Very accurate, easy to use and durable. - by ,
5/ 5stars
I am putting hardware on all the cabinets in our home and knew I certainly did not want to measure every piece, nor did I think I could easily create something on my own. I can’t speak for the cheaper versions that are out there, but this device is easy to use, very accurate and a huge time saver. I can bang out a normal master bathroom set of cabinets in 30-45 minutes easily. I can literally drill the holes faster than someone can install the hardware after drilling. Highly recommend! Also comes with its own heavy duty storage case, which also would hold any add-ons that are available for this device for really large hardware needs.
Made in AMERICA! - by ,
5/ 5stars
Quality product! I have had the handle jig for over 10 years and it still looks like and works like the day I bought it.
Made in AMERICA! - by ,
5/ 5stars
Quality product! I have had the handle jig for over 10 years and it still looks like and works like the day I bought it.
Easy Peasy - by ,
5/ 5stars
Redid our kitchen cabinets and had 40 cabinet handles to place, I knew that I needed help. I read all of the reviews and although the jig cost a bit more than I wanted to spend, I wanted to finish the kitchen right. I am so happy that I splurged for the cabinet handle template jig. I am a novice DIYer and found the jig easy to use right out of the heavy duty plastic case that it came in. The job was quick and easy and the new cabinets and handles look beautiful.
Accuracy and speed. And small to large range. - by ,
5/ 5stars
I am a Handyman by trade.Don't like the price.Do love the tool and how fast you can set it up and start shooting holes.No clamps, no guessing.Very easy to switch from left to right doors.Solidly built and light.With the kit, you can also do holes for the pin to hold shelves in a cabinet.A very serious tool. Glad I bought it.
A hard storage case for the Arrow PT50 pneumatic stapler - by ,
4/ 5stars
The Arrow PT50 pneumatic stapler I bought did not come with a storage case, and I was looking for something affordable that I could customize to fit the tool. I researched camera cases, and pistol cases, but they were too bulky and too expensive.This case is a bit larger than the PT50, leaving me room to store a couple of boxes of staples along side the tool.The case came with 3 layers of foam: 1 layer of egg crate foam for the lid, and 2 layers of pre-scored pluck foam for the bottom. The pluck foam came in 2 different thicknesses which will allow you to make a deep or shallow cutout of whatever you are storing in the case.Tip: use a marker to outline the object on the foam, then cut out your shape.The lid is hinged with plastic rods, which seems more durable than cheaper boxes where the lid and base are a continuous piece of plastic. Also, the fasteners are metal, not plastic. They are not lockable, and there are no holes on the case to attach a lock.The case is suited for light use, but the padding and plastic are probably not durable enough to be throwing this thing around in the back of your work truck. Also, it is not waterproof.For $19, I got what I expected, and I would recommend this for light use, or basic storage.
Best I’ve ever used! - by ,
5/ 5stars
Best cabinet door jig I’ve ever used!! I’m a full time cabinet setter and use this all the time for cabinet hardware! Easy to use, fast and precise.
Works for me - by ,
5/ 5stars
I needed a relatively shallow case to carry my blow gun darts.
Great piece of equipment - by ,
5/ 5stars
Fantastic piece of equipment and well worth the money. I am an engineer and was a toolmaker in my younger years. This is well designed and well made and will save you time and frustration.
Life saver when installing cabinet and drawer hardware - by ,
5/ 5stars
This is a very effective tool, the only problem was I didn't buy the extension piece and most of drawers were too wide so I still had to manually measure each drawer, but I loved this tool and recommend it.
Buy this PRODUCT! - by ,
5/ 5stars
This product is amazing, my husband said it saves hours on a job. My daughter works with him and always gets frustrated with the hardware she is in love with this product.
Great Tool, Even for the Non-Professional - by ,
5/ 5stars
I am not a professional cabinet installer, but just a female DIY enthusiast. I am updating my 12 year old kitchen and bathrooms and wanted to install new hardware. Before I just had knobs, but wanted to install more trendy handles. Once I read the directions and figured out how it worked, I was able to perfectly install my new hardware myself and everything was perfectly aligned. The instructions were very detailed and had picture,s which I found very helpful. This was definitely a bit of an investment, but know it will come in handy for years to come. Construction is very sturdy, and the hard plastic case will keep it perfectly protected. Glad I purchased, as it probably saved me frustration and time in the long run.
Pays for its’ self!!! - by ,
5/ 5stars
Takes a bit to set up, but once you got it set it’s ready to roll. Would buy the extensions for the larger pulls if to do over again.
Expensive but well woth it - by ,
5/ 5stars
I love this hardware. I had a small knob with 2 holes and this worked great for that knob. Thank you 🙏!
High quality / Heavy duty - by ,
5/ 5stars
High quality tooling. Works well.
Good price - by ,
5/ 5stars
Works Great
Good quality - by ,
5/ 5stars
Works for what it's intended for.
Good quality. - by ,
5/ 5stars
Good protection for the hardware boring jig.
Great - by ,
5/ 5stars
Helpful
Great Quality - by ,
5/ 5stars
We researched these kind of products and found this to be the best value. Upon delivery, we were glad to see our research proved helpful. This is a great product.
Too small - by ,
1/ 5stars
The 3/8-inch collar was 1/64 inch too small. Didn't fit on my 3/8-inch drill bit. I need a full 3/8-inch hole to fit a dowel properly, going to a smaller bit to fit the collar is a non-starter. I checked a couple of other sized collars and they were also under sized, but not by quite as much. I'm returning.
Works well - by ,
4/ 5stars
Very good jig. Pricey, but we will use it for years. Door installer.
Works perfectly. - by ,
5/ 5stars
They arrived on time. They worked perfectly. Perfect fit.
Top Quality - by ,
5/ 5stars
Very good collars. Wish it had a 17/64 and others in the /64 range.
Worth every penny - by ,
5/ 5stars
Good quality for larger drawers & cabinets with larger hardware. Constructed well. I did need to order the extender for my drawers .
Cover the middle hole - by ,
5/ 5stars
Works great, has a leaning curve. Easy to use but tape the middle hole. May take some time before it's faster then the way you do it now but great on big jobs.
No Mistakes. Quick Setup. Once set for the Doors, Do 1 or 10 same for the doord. - by ,
5/ 5stars
It is by far the fastest way to set handles and pulls. Record time and no mistakes. Didn't think it would be anywhere worth the money. I was wrong. worth every penny. From small to large kitchens your return on investment is within the first door and draw. Recommended. Oh I recommend this. Have done 2 major jobs and extremely happy. Thank You
Good - by ,
4/ 5stars
It's a great jig. Pricy, but worth the cost if you use it for a living. Replacement cabinet doors can be $100+/- if you mess up and poke a hole in the wrong spot. Saves time in labor and wood jigs wear out quick. I'm glad there is finally a case.
Worth every dime - by ,
5/ 5stars
Greatest tool ever
A must if you're installing a bunch of new cabinet pull bars in a renovated kitchen or bath - by ,
5/ 5stars
Made the job easy and the aligment perfect. You'll need the extention if you're going for the custom look of 12' bar pulls like we did in our new house!
The best thing to use when installing 12 or longer handles!" - by ,
5/ 5stars
I purchased inexpensive 12' satin nickel kitchen cabinet bar pulls. Do not try to install pulls this wide without buy this extender along with the knob placement jig. Makes the job quick and consistent.
Works okay - by ,
3/ 5stars
Works okay but I feel a little over priced.
So much better than the plastic templates! - by ,
5/ 5stars
I struggled over whether or not to spend this much money on a template to only use on the cabinets I just purchased through RTACabinets.com however, after spending $12,000 on those cabinets, I did not want to trust a cheap plastic template on the job.So happy I made the decision to get this jig. I decided where I wanted the handles, marked the center of the area I wanted it in, put the jig on the door, lining up the center mark with the center mark on the jig both horizontally and vertically. I tightened down the plates so it would be set in that position. I then covered the center hole so I wouldn't accidentally drill that hole out. I placed the jig on the door and drilled. The handles fit perfect. I was surprised that the drill bit that came with the jig did not severely blow out the back side of the hole. The screw head covered any minor blow out.I went along and drilled the holes and the hubby followed up with the handles, sort of a short assembly line. By the way, I am a 68 year old woman and the hubby is 73. If we can use this with success, anyone can. If it doesn't work for you, you must be doing it wrong.Some said it only came in a cardboard case, but I received a hard plastic case with a future spot for an attachment that allows you to place adjustable holes for shelves. Something I might want to purchase later.Excellent buy. Would recommend if you have to place a lot (83) of handles on your cabinets and want to make sure you don't screw it up, get this jig!
I was hesitant to purchase this case because of the mixed reviews - by ,
5/ 5stars
I put off buying this case because there were some questions in the reviews about the quality control, some people had nothing bad to say, some said the case didn't perform as advertised. The case is fine, it holds all of the loose components in place. The thing is, the places where parts are securely held in the lid are tight and the first time I put the extension ruler in I had to use more pressure than I expected I was going to need, but since that first time it's been easy to secure it and remove it and it is held firmly when stored. True Position actually included a slip of paper inside the case that explains that this is normal and also explains that the jig itself is held in place by the lid of the case when closed and is otherwise floating, which is the same as with any tool case, i.e. a drill. It's a good product and I'm satisfied with my purchase.
Expensive but works well. - by ,
4/ 5stars
The price is hard to justify for a DIYer.But it delivered consistent holes for my cabinets and drawers. A bit of math is needed to center and align everything. I shaved a pencil down to fit in the drill hole to mark the locations first and it provided me the opportunity to mark and re-measure.The provided drill bit worked adequately.Comes with a hard plastic case.
Perfect for the money. - by ,
5/ 5stars
It was very easy to pull the squares and sent my electronic equipment in the box. Good solid enclosure.
Not tight enough to properly hold the jig and accessories - by ,
2/ 5stars
Not tight enough to properly hold the jig and accessories. Love true positions jigs but this isn’t on par with the quality of there hardware jigs. I bought one with intentions to buy 4 more for the others jigs my installers use, but won’t because of the loose fit. Maybe I just got a bad one or something but when you have a $1000 worth of jigs from the same manufacture you assume the case should be on same level as product going in it..
Hold, my GoPro and Panasonic and all the attachments - by ,
5/ 5stars
I get it all in one case. Exactly what I needed.
Exactly as advertised - by ,
5/ 5stars
I bought these because of the split ring cinch around the bit, vs a set screw into the bit. Others here have panned this product as not being flexible enough to grip the bit. I had no problem with that. These collars cinch tightly and hold their position. Awesome product!And I received them a day earlier than forecast- can't beat that!
The last drilling guide I’ll have to buy - by ,
5/ 5stars
First drilling tool i didnt have to use a tape measure on. By far the best Ive used. Perfect placement of handles which is a must with 6” and longer
Great tool - by ,
5/ 5stars
Fit well and are easy to use. Won’t fracture the bit when they are installed. And they stay relatively strait
Fairly compact. - by ,
4/ 5stars
Worked ok. Used for a boat toolkit.
Must have for professional or novice use... - by ,
5/ 5stars
Highly recommend... 49 handles installed in 4 hours almost perfect alignment... Just double check what side your handles are to be located, this was so easy to use I got in a hurry and made one mistake... Luckily my cabinet guy can fill and stain my error so I got lucky... Buy in confidence...
Best tool for hardware install ! - by ,
5/ 5stars
Finally I have full set of True Position tools!
Best tool for hardware install ! - by ,
5/ 5stars
Finally I have full set of True Position tools!
Expensive, but worth it! - by ,
5/ 5stars
With this jig, I was able to easily and precisely drill for handles for all my cabinets. Setting up the jig and drilling the holes is really quick. As someone with little experience, I was able to install handles on 10 drawers in about an hour and have them all perfectly centered. It’s easy for one person to set up and drill with no help.The construction quality is very good and it’s easy to square up with your drawers and doors. The case it comes in is nice though it’s a tight fit for some of the parts.Also, be sure to tighten down the thumb screws all the way or else it has a tendency to slide a little.
Great quick delivery - by ,
5/ 5stars
Just as described. Quick service
A must have - by ,
5/ 5stars
This jig is it a must have wish I had those years ago
Best Knob & Handle Jig EVER!!! - by ,
5/ 5stars
I own a Kitchen & Bath Showroom, we average 1 kitchen & 1 bath ever week. This tool is by far the best Jig we have ever used. Have more than a dozen other jigs collecting dust now. So if you are looking for a jig don't look any further, yes this jig is a little more expensive, It is the BEST. By the way, Value Tools, USA provided the most amazing customer service.
Prompt Shipping. - by ,
5/ 5stars
Good.
Great product - by ,
5/ 5stars
Great product easy to use and high quality materials.Fit perfect on each individual drill bit.
Simply the best - by ,
5/ 5stars
Tried a few other cheap jigs. I still use a clamp with this.. but.. well.. 38 pulls in 4 hours, if you got a lot of pulls to put on, you need these. Don't waste time with kreg or the knockoffs. THIS is where it's as.
Good - by ,
5/ 5stars
Very good toll
Practical - by ,
5/ 5stars
Useful to protect my investment
Easy to use Jig - by ,
5/ 5stars
This jig take all the tedious work out of installing cabinet hardware. Just a little measuring and setting and you are ready to go weather installing one, twenty or a hundred. I have several type jigs but this tops them all.
Works well in most cases - by ,
3/ 5stars
This works well in most cases and does significantly speed up the process of putting on a lot of knobs and pulls. I found that there were certain width drawers that the extension piece could not be used because the drawer was too big for no extension but too small for the extension piece to work. The main reason for 3 stars is I feel that for a tool this expensive it should include a case. It came in a cardboard box which I thought was insulting after paying this much for a tool.
The best for hardware installation in the field - by ,
5/ 5stars
We install cabinets for a living and do 3-6 full house installs a week. Perfect install each time.
works great - by ,
4/ 5stars
Exactly what you need to do cabinet drawers. Works great with the original tool
Accurate - by ,
5/ 5stars
Very easy to use
Great Case - by ,
5/ 5stars
Exactly what I was looking for. Holds my tools and parts so they won't get dusty and contaminated.
This thing is built like a surgical instrument. - by ,
5/ 5stars
I had about 30 handles to install on my new kitchen & pantry cabinets. Ten were 7 inches on cabinet doors (all the same) and the rest were 13 inch pull handles on 30 and 36 inch drawers. The lower drawer faces are inset about 3/8 in from the frames (Shaker style) so that made 4 variations of drawer set-ups.I’m not an installer, just doing my own install in my own house. If I goof up a door or drawer front it would take a month to get a replacement and the cost would be most of what this tool cost.The tool worked better than I expected. I read the reviews so, I made sure the thumb screws were very snug and checked them frequently while using it. What would have taken me all day ended up taking about 70 minutes start to finish. Everything turned out perfect.This thing is built like a surgical instrument. It does exactly what the manufacturer says it will. Personally I consider the price to be a bargain.
Use in conjunction with the True position jig - by ,
5/ 5stars
Great for repetitive holes in wide drawers
Perfecto - by ,
5/ 5stars
Quedo perfecto el temple
ITS ONE OF THE BEST QUALITY-AND PRO ONE! - by ,
5/ 5stars
ITS ONE OF THE BEST QUALITY-AND PRO ONE!
Great for storing and carrying electronic hand held tools. - by ,
5/ 5stars
Great product ! The removable foam cubes allow me to customize snug holding areas for my electronic hand held tools. Now I don't have to worry about them getting damaged.
Nice case, easy to set up. - by ,
4/ 5stars
Nice case
High quality fit and finish. - by ,
5/ 5stars
This is a high quality jig with excellent fit and finish and accuracy. I’ve always either used a couple of combination squares or a shop made jig for knobs and handles but this thing saves so much time and is dead nuts accurate. Should have bought it a long time ago.
Great Jig! - by ,
3/ 5stars
This is a great tool, no doubt. But at this price point, I had to alter it to make my dimensions work by flipping the “y” axis stop and grinding the knob down. For $189, that is a 2 star demotion. It should have included the $59 “y” axis extension. $250 for this combo seems really high. All in all, I was able to mount 42 knobs and 22 pulls accurately after putting in the time to get the stop fixed. Would recommend with these caveats
Won’t hold anything it’s suppose to. - by ,
1/ 5stars
I had the same experience as the first review. It doesn’t hold anything. The bits fall out and the extension won’t go into the slot for it. Must be bad quality control because the other two reviews have praise.
Worth every penny. - by ,
5/ 5stars
I love this tool. It makes doing hardware so much faster. I do whole houses over 3000 sq ft in about 3 to 4 hrs. And 12000+ sq ft homes in under a day vs a few days. This jig is precise and flawless in design.
This is a MUST-HAVE tool! - by ,
5/ 5stars
I've installed cabinet hardware every once-in-awhile and got by with the plastic templates, measure, mark, drill and install. I recently got a job in a multi-million dollar home with more that 160 drawer/cabinet pulls. I decided to get this jig template and am very glad I did!You set it up once, go from door to door/drawer to drawer(of same size and positioning) set jig on door/drawer, drill, install and move on.I also purchased the TP-ERA Extended Ruler Attachment; TP-2312 Long Hardware Extensions; and the carrying case. I highly recommend you get these accessories as well. As you can see in pics I had some wide drawers and the accessories were a must!If you are thinking about a similar knock-off, DON'T! Get this and the accessories, you will not regret it.
Makes installing cabinet hardware a trivial matter - by ,
5/ 5stars
I don't normally write product reviews. In fact, I never write product reviews. However, this is one excellent product. It truly makes the daunting task of installing cabinet knobs a trivial matter. Very well constructed and simple to use.It is very expensive. I won't go so far to say it's worth the money, but it is an excellent tool. I would have been much happier at a hundred dollar price point. If I were a professional, it would be money very well spent, but a bit much for personal use.
This tool will make you look like you know what your doing ! - by ,
5/ 5stars
I do this for a living this is the best jig I have and I been doing this for 55 years
Great! - by ,
5/ 5stars
It works perfect, specially to mark the holes on drawer fronts
Molded case doesn't actually hold" anything in place. Loose." - by ,
1/ 5stars
Poorly molded. Does not hold anything that came with my jig. The bits dont 'snap' into the case, they just lay in the slit and fall out as soon as you try to shut the lid. Very dissapointed in the case.
Very good tool - by ,
5/ 5stars
The product works as specified. I have used it to do cabinet pulls and handles. I wish they had a hard plastic case for this as I travel from job site to job site and I think the cardboard case will get beat up eventually. It helps to do consistent placement of cabinet handles and pulls. Recommend doing all of your cabinet doors first and then doing all of your draws so that you get a consistent location for the cabinet door hardware and then the cabinet draw hardware. Tool is on the pricey side but is durable if you protect it in the case when not in use. The markings on the tool are very accurate as I have double checked them with a tape measure before drilling any holes.
Saves all kinds of time! - by ,
5/ 5stars
I use this almost weekly as a professional trim carpenter. It is easy to use, extremely accurate, and well made. This tool will save you hours per cabinet/kitchen job.If you are on the fence about spending the money, just buy it! You will love it!The only suggestion I have is is to make the knotch that lines up the centerpoint larger/longer so it is easier to see.
High quality blow molded case with room for the true position jig and all available accessories - by ,
4/ 5stars
Great case for a high precision tool. I purchased this to keep my jig from getting damaged in the back of my truck with all of my tools. I love that it holds 3 of the drill bits for the jig. It also holds the extension ruler available for this jig. My only criticism is that the case doesn't make it readily apparent where all the pieces go, and the main jig doesn't seem tightly held in place like the drill bit and extension ruler do.
Mega time saver - by ,
5/ 5stars
Super high quality and precise jig. Thick and durable all metal parts. I highly recommend getting the case for this and the extension ruler for larger drawers if you install professionally. This tool saves a ton of time over marking out each hole individually
Very sturdy ruler - by ,
5/ 5stars
There's no way to properly ascertain the quality from the picture or description. This is a very high quality piece. Very thick and sturdy. The ruler starts at 0 on one side and 5 inches on the other. It also has standard and metric markings like the jig. The end stop locks securely in place and adds a ton of functionality to the true position hardware jig.
Your Friends Will Want To Use It - by ,
5/ 5stars
Expensive, but works perfectly. Everyone that you know who is installing knobs/pulls will borrow it from you.
Decent, but room for improvement - by ,
4/ 5stars
Pretty good case. Everything fits except the 5mm drill bit that comes with the jig. Draw latches seem a little flimsy. Still better than a cardboard box.
Collar set - by ,
5/ 5stars
This set is very well made. I find the design very handy and much more useable than others. Very pleased.
Amazing, well built, and fast - by ,
5/ 5stars
I just had to install 40 handles in a kitchen / laundry room. Many plastic templates are not square, bend, etc. I have tried them. Not good. This product is very precise. Comes with a drill bit that fits into guided holes for nice square drilling. It was so fast that it only took me ~2 hours to do all 40. Probably saved me 2 hours. Love it.
Pays for itself - by ,
5/ 5stars
Labor is not cheap in the big city, this tool will pay for itself after a couple of jobs. Then it will make me money for the next 20 years. Best product on the market!
Great Time Saver - by ,
5/ 5stars
I got this as a gift for my son who is a contractor and had to install many doors and drawer fronts in the kitchen of his new house. He did it very efficiently wit this tool and loves it. He also uses it in his business and says it saves him a great deal of time.
Things you should know. - by ,
4/ 5stars
This thing definitely speeds thing up, just used it to install about 100 pulls of different sizes on a bunch of doors and drawers, which is a typical size project for us.However, you need to be careful.The 5mm drill bit that comes with it works fine., The bit's flutes will clog up when drilling hardwoods like maple so be sure to run the bit out to clear the flutes before you drill through and you will not have any blowouts.It will scratch the cabinet if you don't put tape all over it, which makes it look kind of ridiculous. Some thin rubber padding on the surfaces that touch the cabinets would really make this thing a lot safer to use.The center hole is nice, definitely made it easy to use by marking center lines for the pulls on drawers, which is the fastest way to a lot of the same height but different width drawers. Though if the lines were extended along the sides/edges to where they touch the face of the drawer or door I wouldn't have to peep through the center hole when lining it up.Also be sure to check the thumbscrews often, a couple of times one of them loosened up while I was drilling, which was as little scary but not the disaster it could have been, just reset it and was good to goit is a little crazy that, for that price, it comes in a cardboard box, which I am gonna get rid of and make/find a better one since you can't put it back in the box without changing the setting.Anyway, besides all that I do really like this thing and recommend it for those who regularly install a lot of cabinet hardware.
Worth every penny - by ,
5/ 5stars
Perfect tool
BIG time saver! - by ,
5/ 5stars
Tool worked great! completed cabinet pull installation quickly and cleanly. A few minutes to measure twice for setup and then get to work. Tool is easy to set up and use. Don't recommend the FestTool drill that Amazon recommends. The drill that came with set works fine, but the FestTool drill bit broke after a few holes. Think it was an issue with the bit, but drilling into white oak & hard maple does take a toll. Recommend having a spare regardless. Once you get started its simple to keep going, but having a sharp drill bit makes the work easier and safer.
Amazing - by ,
5/ 5stars
Great tool. Worth the money
No more out of alignment handels - by ,
5/ 5stars
I have used and made my own templates that I use a punch tool on. As hard as I try the left is off from the right just a hair. Most customers notice a hair. This jig is identical left and right and you drill instead of punch marking. Really saves time and have great results. When I do pulls I found I should cover center hole with tape as I accidentally drilled wrong hole. The only thing, once you put on extension bars you can't use the stops.
This is a real tool. - by ,
5/ 5stars
Very easy to set up and use. Accurate and repeatable. Flip it over and use for matching doors. Compared to the cost of the cabinets, this tool is a good deal.
It's great I love the product very very much quite enjoyable to do Hardware now - by ,
5/ 5stars
Absolutely love this product it makes installing Hardware Febreze really really great although if you do a lot of bigger doors or drawers I would suggest the extension kit with it
Not bad still learning - by ,
5/ 5stars
I never use this template but I still get job done$200 dollar seem too muchTry to get one anyway
Great tool - by ,
5/ 5stars
Best hardware install tool we have ever used in 10 years doing remodels.
Five Stars - by ,
5/ 5stars
Excellent product.
Don't buy anything else for cabinet hardware installation! - by ,
5/ 5stars
This item, while expensive, is the only way to install cabinet hardware. In our last house we had custom cabinetry put in and initially didn't have hardware installed. I tried initially to install hardware with a home made jig, two handles later I bought this hoping it would produce better results. Once we decided on it I bought this and installed all the hardware with out issue. We are on our second house and have a big kitchen we are repainting for now and again putting new hardware on. This really is worth every penny when your doing the work yourself. I highly recommend this tool.
The best - by ,
5/ 5stars
The best
Thumbs up - by ,
5/ 5stars
So first I purchased this type of set by the cheaper made in China version; but after several months had to try this one; completely worth every penny; cuts my work time tremendously. The quality, sturdiness is great. Amazing product.
A Beautifully Made Instrument!! - by ,
5/ 5stars
I am 101% pleased with my *MADE IN USA*, tool purchase!!Home Depot & Lowe’s sell plastic junk!!Drilling into existing cabinets or new caninets is so critical to get it right.This quality made tool makes it a breeze!!My hat is off to True Postion Tools, Thanks!!
Five Stars - by ,
5/ 5stars
Easy to use.....I drilled 144 holes for cabinet hardware with this and then sold it for $125.
Perfectly installed handles were a benefit for the high price ... - by ,
5/ 5stars
Perfectly installed handles were a benefit for the high price paid. It was worth, since I had European handles that had longer distance between screws, and most competitors would not provide this width on the template.
Fantastic piece of equipment!! Worth every penny. - by ,
5/ 5stars
I just left a one-star review for a Kreg jig, so I thought I should focus on the positive of this jig which I bought when the Kreg failed. I don't expect a $25 jig to work like a $180 jig, but the TP Tools jig is a work of art. Is it pricey? Yes. But the bottom line is that it's a complete rock and after familiarizing myself with it, I was able to install an entire kitchen's worth of hardware...about 70 pieces...in about 2 hours. My door handles were centered inside the frame with about 1/8' in either side. Any off measurement would be readily apparent. This jig really delivered and let me complete my job with complete confidence. Once set, the jig can be flipped over so that all doors can be drilled with the same template. There was no play in any of the moving parts and the slightest amount of error I could see in the mounting was due to milling variation in the doors, not the jig. Can't praise this tool enough. The one change I could see that would make this absolutely perfect would be to build one arm 12' long so that base drawers could take advantage of the stop. As it is, the jig needs to be manually centered for drawers.
I like this tool - by ,
4/ 5stars
I like this tool, or jig, and use it now constantly. But I do wish it could do a few things at this time it cannot. But the accuracy is spot on, and the ease of use is good. I end up setting the stop collar on the 5mm drill bit when drilling holes for door handles or pulls. I finish off that hole with a tapered bit, as not to blow out the back side of what I am drilling. Take a moment more, but if you drill with the 5 mm and then go back and punch out the holes with the tapered bit, its quick enough.
Worth the money! - by ,
5/ 5stars
Only mistake was mine. The tool was steady never walked. Handles are even.
The tool is very well made and very flexible in ... - by ,
5/ 5stars
The tool is very well made and very flexible in setting hardware drill patterns. It's a big help in setting cabinet pulls accurately. Almost idiot proof. A bit expensive but will minimize mistakes.
Good - by ,
4/ 5stars
I like it
Great tool - by ,
5/ 5stars
Great tool.A bit pricy but well worth it
Great!!! - by ,
5/ 5stars
Easy to use, it makes your money worth
Five Stars - by ,
5/ 5stars
Perfect for the Job!
This tool is so convenient for knobs and handles makes ... - by ,
5/ 5stars
This tool is so convenient for knobs and handles makes fast work and helps tremendously for making all yr knobs or handles dead on!
Pro tool - by ,
5/ 5stars
Nothing like drilling holes in someone's $100,000 kitchen cabinets. I've done more than a few and still, 'Please, god, please, god, please, god...'. It never goes away. So obviously a jig. I've used, owned, and made quite a few over the years. By far, this has been the best... repeat, by far and I've given my other jigs away. Professional installer's tool. Made to last years. Simple, accurate, quick, easily re-positioned for left or right, door or drawer. Even better, has measuring index so accurate, I've caught errors once or twice with just a quick visual. Negatives? The price... and it doesn't come with a protective box (but, hey, you're a pro-carpenter so make one). Positives? The value of speed, accuracy, efficiency, and quality. Buy once, cry once, drive on.
Five Stars - by ,
5/ 5stars
Works great!
This jig is the best I’ve ever seen - by ,
5/ 5stars
I am a professional cabinet installer. This jig is the best I’ve ever seen. Highly recommend it.
i was looking for a good handle drill jig espacily one that have the option ... - by ,
5/ 5stars
i was looking for a good handle drill jig espacily one that have the option for wider handles, the True Position Tool came up after a quick search on the net, it looked to me very easy to use and well built. so i checked the reviews and they were very good so i decided to order it .since i got it i used it on 4 kitchen projects i had (i am a custom cabinet maker ) ,i must say that it works superb , fast adjustment of different handle sizes ,accurate measurements and makes the process itself much faster .highly recommended for professional users .the only complain I have about the product is the cardboard case -I think its not durable enough for a trade person .
No more second guessing - by ,
5/ 5stars
Works great!
I highly recommend this. Please, buy it you will not regret it. It will pay for itself in no time - by ,
5/ 5stars
My life has been improved once again. I have purchased yet another great tool. After thorough research, I decided to bite the bullet and purchase this high-quality cabinet hardware jig made by @truepositiontools model number TP-1934 Let me start by saying how happy I am. This is a fantastic tool. Within minutes of using it regular hustle of installing cabinet door hardware on random size doors disappeared. Installation process became easy and fast. There were no more need to make random jigs (imagine time-saving) or need for flimsy brick and mortar store offerings. The whole process feels like a breeze - measure, divide, set up the jig, drill install it's that easy. It's hard to explain you should try this yourself. I highly recommend this. Please, buy it you will not regret it. It will pay for itself in no time◾◾◾⬇️Here's what I think ⬇️◾◾◾PROS:◾High quality tool made from solid anodized aluminum◾Easy to adjust - measure, divide, set up◾Made in good old USA 🇺🇸◾When setting up properly installation precision can be felt at the first tryCONS:◾Price: $100 would have been more than enough for this tool. At $200 I would prefer at least Tanos systainer◾5mm drill bit has too much blow out even when light pressure is applied (see pics included)◾It would be nice to have some sort of spacers included when drilling in inset cabinet drawer fronts (see images included)◾◾◾Overall: I am satisfied even after I had to MCGYVER some 5/16 shim with help of 2P10 and the fact that my 3/16 Milwaukee drill bit performed much better with less blowout than 5mm bit that came with the kit (see images)◾◾◾It's officially #alderapproved
Five Stars - by ,
5/ 5stars
Works great
Excellent tool. Perfect installation of cabinet handles - by ,
5/ 5stars
Excellent tool. Perfect installation of cabinet handles.
Five Stars - by ,
5/ 5stars
Nice piece of equipment!
Best system we have tried and used in ten years ... - by ,
5/ 5stars
Best system we have tried and used in ten years of installing cabinets. Pays itself back with one kitchen. Guide is great keeping the drill bit perfectly square and adjustment is easy.
Great - by ,
5/ 5stars
Worked fantastic...so easy to use and accurate. Saved so much time and resulted in a professional install
Saved me hours - by ,
5/ 5stars
This jig is a dream....nothing like having the boys borrowing the correct tools for the job from the girl!
This thing is amazing. If you need to drill more than a ... - by ,
5/ 5stars
This thing is amazing. If you need to drill more than a few doors then it is worth every penny. I bought it only for one project, my kitchen, knowing that my precision drilling is a little lacking. Drilling into your cabinets incorrectly can cause serious cosmetic problems as well, so I figured it was relatively cheap insurance. I drilled every single hole perfectly, about 100. I was even going to sell it on ebay when I was done but no way, I'll have this forever.
Perfect jig.... - by ,
5/ 5stars
Excellent jig. I have bought and made just about every jig made. As a high end finish carpenter, this is well worth it. Bought and returned a few including Sommerfeld. This unit is on part with Woodpeckers precision tools. Just installed 46 pulls and knobs in my latest kitchen installation in under 1 hour. Every one was perfect. So fast, easy and precise... After almost 30 years as a finish carpenter, I found a jig that actually works... Light weight, easy to adjust, and perfect..
A must buy for large kitchens. - by ,
5/ 5stars
Absolutely a life safer...well large time saver in any case. I order this after my wife had ordered a $6 plastic template that didn't fit our handles. It seems our handles were a bit oddball with a center spacing of 4 and about a 1/3' from center to center. We have a lot of cabinets and with this product I was able to do our top doors in 15 minutes. Our bottom drawers took a while longer as finding the center was a bit more difficult, but they all turned out great!The handles themselves are not always straight as they are a wrought iron type that aren't perfect. That's more of the handle issue, but this product is very sturdy and tough.
Five Stars - by ,
5/ 5stars
Love it!
A must have add on! - by ,
5/ 5stars
It works as advertised, but if you are creative you can use it for much more! Would buy again!
A must have add on! - by ,
5/ 5stars
It works as advertised, but if you are creative you can use it for much more! Would buy again!
Five Stars - by ,
5/ 5stars
Great!!
Five Stars - by ,
5/ 5stars
These are great and stay put when you tighten them down.
Gave as a Gift....so far so good.... - by ,
5/ 5stars
He seems to like it. Cabinet hardware is not his favorite thing to install so hopefully this will ease his pain and help with the process.
used only once so far exactly what I needed a ... - by ,
5/ 5stars
used only once so far exactly what I needed a pleasure to use
We liked so much bought a second one so each crew ... - by ,
5/ 5stars
If you do a lot of cabinet installs you are going to want this tool, our company installs about two to three kitchens a week and this made hardware install so much faster and more accurate. We liked so much bought a second one so each crew has one. Worth every penny just wish it came with a better storage box, than just a cardboard box.
Its the one - by ,
5/ 5stars
This the best tool a contractor can have for cabinets no more hand made jigs or ruined doors and its made in the USA
totally love it. It got the job done very quickly ... - by ,
5/ 5stars
This jig was very very very help full....totally love it. It got the job done very quickly and beautifully.
Great quality tool - by ,
5/ 5stars
Very quality tool should last for many years
Love this jig - by ,
5/ 5stars
Love this jig. If you are in the cabinet business this is a must have. Do yourself a favor and get the extension bars as well. Some of these designer handles these days are long and very thin with no wiggle room for error. I've had to drill some handles so close the the edge of the door it was scary but the jig made easy precise work of it. I wish it had a plastic case all though I like the function of the cardboard case with extra pockets to store extra tools. I use it to carry things like screw cutters for screws that are too long, taps for messed up handle holes, extra drill bits, extra odd screws, etc.I can't say enough about this jig.
AMAZING! - by ,
5/ 5stars
This drill guide is the best you will find anywhere. I install a lot of kitchen cabinets and this tool is a time saver. Very accurate! Whoever thought of this put a lot of thought into it. It is a precision instrument, not something you want to toss around or drop. It is expensive, but worth every penny if you use it often. NO OTHER JIG ON THE MARKET CAN COMPARE. It is for professional installers.
Five Stars - by ,
5/ 5stars
Love it!
WELL MADE - by ,
5/ 5stars
WELL MADE AND DESIGNED. NOT SOMETHING YOU WOULD FIND AT H/D OR H/F. CAN'T COMMENT ON THE TOOLS PERMORMANCE, SINCE I HAVE NOT USED THESE STOPS YET. JUST BY LOOKING AT THESE STOPS I AM SURE THEY WILL WORK FINE, JUST AS EVERYONE ELSE SAID.
tool payes for it self in labor savings - by ,
5/ 5stars
If you are a professional cabinet installer this tool will pay for itself in a very short time. I have purchased 4 of these tools one for each of my crew leaders. My first is about 5 years old and you can hardly tell it has been used.I am a kitchens installer and install approx.. 2 kitchens a month.
UPDATE 2/16/18: 4 STARS NOW - by ,
4/ 5stars
The idea of clamping the collar on the drill with a clamping screw instead of a set screw clamping directly on the bit is a FAR superior way to do it. Potentially better grip, no wobble etc.etc. However, this set has a way to go. The clamping screws are very fine thread metric in aluminum which isn't a very good idea. also, the slot doesn't go far enough across the collar so 'as-is', they can't really clamp the bit. I found that squeezing the collar on the bit with Vice-grips, THEN, tightening the screw was the only way, I could get the collar to grip the bit. Putting some molly grease on the screw helped too. I'm going to cut the groove deeper in each collar so they can flex in easier Just the way they come, they're pretty useless, but they have the potential of being excellent drill stops..Update 2/16/18: I've cut the groove deep enough now on 3 to allow them to flex easier & that definitely cures the problem. Wish the screws were coarser thread though, just lube the threads & use discretion when tightening.
okay but pricey - by ,
3/ 5stars
This adjustable jig works pretty well and the bit it comes with is not bad. I just thought that for the price there would be some kind of bearing or replaceable bushing that would of been included because while drilling the bit kinda squeaks and feels like its going to wear out and get sloppy fast. I did 3 kitchens with it and so far its not showing any signs of wear. I also add a drop or two of oil to the bit and guide during use. The adjustability is endless and precise. Much better than making jigs out of wood and tossing them. Theres only so square you can hold your drill when making jigs yourself. I never made a perfect one without a drill press.
Makes drilling holes very easy, and cuts the time to a fraction of ... - by ,
5/ 5stars
Makes drilling holes very easy, and cuts the time to a fraction of what other methods would take - very glad I bought this for my Main Floor Renovation Project.
The included bit was perfect and using the jig - by ,
5/ 5stars
If you have a cabinet hardware project, this purchase is a no-brainer. We researched many different types of jigs and templates and this one tool solved all our complex install situations. We used this to do multiple 7' pulls, double pulls, horizontal and vertical and numerous knob configurations...all with the highest precision and reliability. The included bit was perfect and using the jig, we made perfectly straight holes every time. It even allowed us to do a 12' towel bar! This is THE right tool for the job...quality, precision, reliability 5-stars across the board.
Best tool I have purchased in years! - by ,
5/ 5stars
This is probably the best tool I have purchased in years. When I first saw the price tag vs. the basic products you can buy, I was a little shocked... however, let me tell you - it’s worth every penny and more.We just purchased a new home that had no pre-drilled holes (our choice)I had to drill holes for kitchen, butlers pantry and 4 bathrooms - 130 cabinets and drawers.Kitchen were all pulls (2 holes) and bathrooms were single knobs.The tool saved me at least a full day of measuring and re-measuring.Template is easy to use, easy to setup for any length (we did some long pulls 256mm in kitchen)Biggest bonus... once you have done the left door, flip it over and it’s alreasy setup for the right door.. amazing design.Highly recommend this tool.Tip 1 - Read the instructions fully, I jumped the gun and my first measure setting was wrong as I did not read which side of the base (top or bottom) was the one to set the measurement on.Tip 2 - when drilling 2 hole pulls, put a piece of painters tape over the center (knob) hole do you don’t accidentally drill that as your second hole (whoops)
Great Product... - by ,
5/ 5stars
Worked perfect...
This is by far the best and most accurate and reusable i have tried - by ,
5/ 5stars
i bought one of these about a year ago. i have tried about all of them out there as i install cabinets for a living. This is by far the best and most accurate and reusable i have tried. it works for both drawer fronts and doors.
Five Stars - by ,
5/ 5stars
Collars work perfectly. Hold firm with no slipping and no damage to my bits
No more plastic templates that look like swiss cheese from all the added holes😂 If you ... - by ,
5/ 5stars
Very well made.No more plastic templates that look like swiss cheese from all the added holes😂If you install cabinets on the regular, you need this!
If you're torn between buying and not... BUY.... you won't be disappointed - by ,
5/ 5stars
I wouldn't try installing cabinet handles without this. Absolutely perfect positioned handles, every time
Used it yesterday and it works great. Done 51 doors and 16 drawer fronts plus ... - by ,
5/ 5stars
Used it yesterday and it works great. Done 51 doors and 16 drawer fronts plus put the 5 inch spread pulls on in 4 hours
Five Stars - by ,
5/ 5stars
Love it
Does what they are supposed to. - by ,
5/ 5stars
So far them seem to hold onto the bit solidly. You really have to crank down on some of them, but overall i'm happy with them.
The collars work out great, what I had hope for and the product ... - by ,
5/ 5stars
The collars work out great, what I had hope for and the product arrived on time, would buy from seller again.
Finally something that makes sense! - by ,
5/ 5stars
I have done woodworking and carpentry for 40 years and I've collected hundreds of 'do dad's'. These stop collars are the best thing since ketchup! I've been using the standard stop collars and I've always been irritated that they are never straight on the shaft due to the set screw. These collars with the split set screw tighten the collars around the entire drill bit shaft so it is straight. I would NEVER recommend the old type with the set screw that locks directly on the shaft. Thank you for making something that makes sense.
Five Stars - by ,
5/ 5stars
I really like it make my job more easy and I save a lot of time
awesome jig - by ,
5/ 5stars
This jig is just top of the line, the only cons is that they didn't make a plastic case for it, and I think this tools deserves it
the jig is expensive but it well worth it. ... - by ,
5/ 5stars
the jig is expensive but it well worth it. it was the only one i found that allowed me to attach 6.25' handles. i had 47 handles to install on doors and drawers. it was well worth it.
The cabinet handles were large - 7 inches - and this jig worked great. Also liked the way you simply flip the ... - by ,
5/ 5stars
Just received and used this jig this week to install cabinet and drawer handles. The cabinet handles were large - 7 inches - and this jig worked great. Also liked the way you simply flip the jig over to quickly switch from right hand to left hand handles. Jig is well-built and very precise. Great addition to my tool collection.
and it worked like a charm - by ,
5/ 5stars
Husband used it for the first time today, and it worked like a charm. He was worried he would have trouble lining up the exact spot for the drawer handles and this works like it was designed to do. We've only done one drawer so far, doing 4 more tomorrow, lets hope it does as well.
A must have - by ,
5/ 5stars
I've been a kitcken remodeling contractor for 30 years and tried all sorts of jigs. Hand made, plastic ones, recomended ones ect. None of which were worth diddly squat. One last try was my recent purchase of True Position TP-1934. This is a remarkable tool. Extremely well made. Machined to exacting tolerance. Easy to adjust and once you have locked down the hardware your good to go. Just flip the jig for left or right hand doors. Draw fronts ect. Buy the extentions if your installing extra long hardware. This is a must for any installer. Packaging is excellent for storage until the next one.A bit pricey but worth every penny.
Best cabinet jig EVER!!!! - by ,
5/ 5stars
I’m so happy I bought this jig. It has saved me a ton of time and money! Fantastic piece of equipment!!
Stop Collar Set That Actually Works - by ,
4/ 5stars
Really great to see someone innovate. Far superior to the other types available that almost always slipped. I held back 1 star because they would work better if the metal was more flexible making them easier to tighten sufficiently. Would definitely recommend to anyone looking for a stop collar set!
Five Stars - by ,
5/ 5stars
Quality seems to be getting better as the years pass.
Made a Hard Job Easier and Perfect - by ,
5/ 5stars
I had already struggled with changing the hardware in my kitchen, and the plastic jigs were useless to me (they move, slip and are never the right size). Only when I was tasked to replace the hardware on a lovely '80's kitchen that had previously centered handles did I have to find something that would really do the job. I just wasn't going to suffer adjusting and readjusting until they were perfect. I was sure there was something that really solved the problem, and I couldn't be the only person looking for one. There are pro's doing this and I was sure they wouldn't put up with the junk offered in big box stores (hey, I love them too). Finally I found this jig - and wow - it is expensive. I called it a birthday present ( and maybe Christmas too) and bought it.It comes in a cheesy cardboard box. At least the box protects the jig, and I was reminded to store it somewhere high and dry. The jig is lovely and well made. When I made my handle adjustments and measurements it was not challenging to finish the handle placements. Be aware that the screws can loosen if not snug, so give them an extra twist for good measure. All your holes are going to be straight as the jig guides the drill bit. It was very satisfying to stand back and admire the fine job the jig made possible. Considering the original price of the cabinets, and the cost of the handles, I was able to make it easier to swallow the price. This jig is worth the extra stretch to buy it.
Worth the cost. - by ,
5/ 5stars
Well made and they work. What else can I say?
Five Stars - by ,
5/ 5stars
It's well made and fine jig. Thanks it's a good addition to my tool kit
Best jig Ive owned - by ,
5/ 5stars
I am a contractor. I used this to install all the knobs and pulls on an entire house the day it came. No slipping, no problems. Best jig Ive owned. I am going to buy the rest of their products for the larger handles. You wont regret buying this.
Five Stars - by ,
5/ 5stars
This is a great hardware jig. I'm a professional hardware installer and love this product
Five Stars - by ,
5/ 5stars
Great product. Big time saver. Well worth the money.
Great product, great price. - by ,
5/ 5stars
Works great.
Excellent tool! Don't waste your time on those flimsey ... - by ,
5/ 5stars
Excellent tool! Don't waste your time on those flimsey plastic guides. This tool makes the job go fast, easy and accurately.
It's easy to get into a rhythm and not think about ... - by ,
5/ 5stars
I bought this instead of calling a handy man or carpenter to install the hardware in our new home. I am a rookie DIYer and I installed 60 knobs and 37 pulls some that had double pulls. I was able to do the whole project in a couple of hours. Unlike other templates this has the hole for the drill bit so you feel really confident that the bit is going into the right spot without deviation. My tip is that once you align the hole(s) you're going use to put some tape over the holes you're not going to use. This will keep you from accidentally using the wrong hole. It's easy to get into a rhythm and not think about what you're doing.
Five Stars - by ,
5/ 5stars
Excellent tool, you can work 20 times faster than the regular way.
A must have - by ,
5/ 5stars
I’m a cabinet maker and installer. The accuracy of this tool is absolutely spot on. Performs flawlessly and accurately every time
I bought this based on the great reviews and I felt the need to add to ... - by ,
5/ 5stars
I bought this based on the great reviews and I felt the need to add to them. This is a great product that is very well made. I used it to install 10 drawer pulls the 1st day I got it and I love it. It's very well made. Highly recommended.
A must have! Well worth the money!! - by ,
5/ 5stars
This product is amazing! My father and I have been in the caninet business for years, where has this been all my life?? The hardware jig cut my time in half... probably more!! It is very well thought out. I could drill faster than my helper could knobs on! Great workmanship!! Well worth the money!! Thanks guys!!
Pricey but worth it if you use it a lot! - by ,
4/ 5stars
I'm a finish Carpenter..so I will use this tool weekly...it's great and saves time. Probably a little pricey for the Diy people. Got to be a way to get the price tag down. But it's worth the time I save with the amount I will use it.
Precision when needed - by ,
5/ 5stars
Cut my carpenters time by 90% and with no errors installing 40+ pulls in my kitchen cabinet remodeling project.
Awesome quality as I expected. Repeat customer . - by ,
4/ 5stars
I bought the original jig over 25 years ago , it's still as accurate as the day I bought it . Adding this version expands my abilities. It was packed well and each part was everything I expected. Even the drill bit & stop collar were high quality ! If you do professional cabinet work this jig is worth every $ . Think about how expensive a mistake can be . My original jig paid for itself on one big job. Clients that choose expensive hardware expect perfect installation. This jig delivers.
I love this jig and it really does save a ton ... - by ,
5/ 5stars
been a professional cabinetmaker for 35 years.. used all sorts of hugs, handmade and otherwise.. I love this jig and it really does save a ton of time and simplifies the drilling procedure for knobs, and pulls.. while although it's a little pricey, it does pay for itself in cutting time off by a good margin on jobs.
an easy and well built tool - by ,
5/ 5stars
Simply put, an easy and well built tool. Super easy to use!
The best tool on the market If you are a kitchen ... - by ,
5/ 5stars
The best tool on the market If you are a kitchen cabinets installer you need this tool. Very easy and accurate hardware install kit Definitely recommend it to buy
... true position jig for a while and it works awesome! I build and install cabinets - by ,
5/ 5stars
I've had the true position jig for a while and it works awesome! I build and install cabinets, it saves lots of time, and no mistakes! Well built, and very durable.
... true position jig for a while and it works awesome! I build and install cabinets - by ,
5/ 5stars
I've had the true position jig for a while and it works awesome! I build and install cabinets, it saves lots of time, and no mistakes! Well built, and very durable.
They work perfect! No more measuring for these little pulls anymore - by ,
5/ 5stars
I have the true position jig, it is an invaluable tool. When I saw these jigs I knew i had to have them as well. They work perfect! No more measuring for these little pulls anymore!
YOU GET WHAT YOU PAY FOR - by ,
5/ 5stars
If you are looking for the best way to install cabinet hardware, this tool is for the rookie and the pro, price is high however you get what you pay for. This universal tool helps to take the risk out of drilling incorrect holes. I was skeptical like you to spend $189.00 to install my hardware, but I spent thousands on my kitchen and didn't want to skimp something im going to have to look at every day, and A crooked/ misplaced handle was not something I could stand. I set up and marked every cabinet door with a pencil then went back and drilled the holes, the jig is reverseable so you just have to set it once for both left and right hand doors. I rate this as a must have.
Five Stars - by ,
5/ 5stars
Big time saver and totaly worth it.
Five Stars - by ,
5/ 5stars
One of the best tools I ever bought. Pro results highly recommended
Five Stars - by ,
5/ 5stars
Yes it really does work as advertised nice job
Five Stars - by ,
5/ 5stars
Yes it really does work as advertised nice job
Five Stars - by ,
5/ 5stars
Very precise quick and easy to use.I would highly recommend it for any cabinet installer.
Five Stars - by ,
5/ 5stars
It works very well. It did exactly what I wanted.
Five Stars - by ,
5/ 5stars
Nice
Five Stars - by ,
5/ 5stars
They work very well did draw handle that was 32 inches long no trouble at all.
Five Stars - by ,
5/ 5stars
They work very well did draw handle that was 32 inches long no trouble at all.
Great design! - by ,
5/ 5stars
This is a well designed tool to facilitate speed and accuracy! After just one job, I know this tool is worth the money for us as cabinet installers. Although it doesn't self center on drawer fronts like the one we were using, it is much easier to get accurate holes. I will probably get the extensions to help center the large drawers.
How much time it saves me is amazing. A true pleasure working with intelligently designed tools - by ,
5/ 5stars
Rarely do I give glowing reviews, but this one deserves it. How much time it saves me is amazing. A true pleasure working with intelligently designed tools.
Easy for novices to use - by ,
5/ 5stars
This tool was awesome. I started out my project using the plastic templates from the store, and quickly messed things up. The square cabinet knobs I was using were very unforgiving and looked awful if even a tiny bit uneven. So I bit the bullet and bought this, and even though I'm a novice, the hardware looks great now. I'm just sad I won't have much opportunity to use it again. Maybe I should start a side business installing hardware...
Five Stars - by ,
5/ 5stars
This is great to use and you get the hardware the same every time.
Five Stars - by ,
5/ 5stars
Super tool I love them.
Five Stars - by ,
5/ 5stars
Best tool I've ever purchased. Time saver for sure.
Best made and designed jig I've ever seen - by ,
5/ 5stars
The quality and design truly are next to none. Best made and designed jig I've ever seen. Never buy another one again.
Excellent Innovative Jig - by ,
5/ 5stars
Excellent jig - clever and well made with high quality components.One sliding positioner works with both 2-1/4 and 2-1/8 Forstner bits via nylon reducer/positioner bushings.Other size sliding positioners are available for 35mm, 55mm and 68mm Forstner bits.My only quibble - the same I have with other True Position jig sets - is that they come in a fitted cardboard box.At $399 for the set - a plastic case would be nice.
Excellent Innovative Jig - by ,
5/ 5stars
Excellent jig - clever and well made with high quality components.One sliding positioner works with both 2-1/4 and 2-1/8 Forstner bits via nylon reducer/positioner bushings.Other size sliding positioners are available for 35mm, 55mm and 68mm Forstner bits.My only quibble - the same I have with other True Position jig sets - is that they come in a fitted cardboard box.At $399 for the set - a plastic case would be nice.
Excellent Innovative Jig - by ,
5/ 5stars
Excellent jig - clever and well made with high quality components.One sliding positioner works with both 2-1/4 and 2-1/8 Forstner bits via nylon reducer/positioner bushings.Other size sliding positioners are available for 35mm, 55mm and 68mm Forstner bits.My only quibble - the same I have with other True Position jig sets - is that they come in a fitted cardboard box.At $399 for the set - a plastic case would be nice.
Excellent Innovative Jig - by ,
5/ 5stars
Excellent jig - clever and well made with high quality components.One sliding positioner works with both 2-1/4 and 2-1/8 Forstner bits via nylon reducer/positioner bushings.Other size sliding positioners are available for 35mm, 55mm and 68mm Forstner bits.My only quibble - the same I have with other True Position jig sets - is that they come in a fitted cardboard box.At $399 for the set - a plastic case would be nice.
Buy once, cry once - by ,
4/ 5stars
This is a must for professional cabinet installers. It's the jig you've been looking for. Your clients will appreciate and trust it, you will be able to relax and wrap up a job without any costly mistakes, and you won't be tied to the stock spacings of lower end jigs. Set a 5-11/16' spaced pull dead center on a 9-3/8' drawer front no problem. Loses one star for shipping a $200 jig in a freaking cardboard case.
Five Stars - by ,
5/ 5stars
👌👌
Five Stars - by ,
5/ 5stars
Works great, saved me a lot of time... worth every penny ...
WORKS - but not as shown - by ,
4/ 5stars
Looking at the picture on Amazon and the True Position Tools webpage - I see a 3 piece set.I could not figure out from the picture what the little aluminum L-Block with the 2 seeming tapped holes was used for.Well - no little block in the kit I got - nor any description of it in the instructions.You will need a tape measure to set the position of the drill bushings relative to the main jig's fence - but I guess you could do a bit of math and account for the offset and then use the main jig's scales as a reference.What you get is a TP-SDG16 (UPC 702706419765) and a TP-SDG32 (UPC 702706419772)Maybe I'll try contacting the manufacturer about the mysterious block.
Time Saver! No more taping, measuring 12 times ... - by ,
5/ 5stars
Time Saver! No more taping, measuring 12 times, drilling, and questioning if the handles are straight again.Measure twice, set it, drill. Next, set and drill. Next, set and drill.I got 3 bathrooms done in under an hour. Waiting on the 47 handles to show up for the kitchen and rest of the house. I'm excited to install them! Weird.
Five Stars - by ,
5/ 5stars
Works great!
Best money spent - by ,
5/ 5stars
Amazing tool! Best money I've ever spent on a tool. Invested a lot of money in the cabinets so it was important to do this right. Easy to use and set up. Don't spend the money to hire someone if you have a little hire than basic DIY skills. Measure twice and then again. Set it and tighten between handles and you won't have a problem.
Five Stars - by ,
5/ 5stars
Good
Five Stars - by ,
5/ 5stars
Excellent
Five Stars - by ,
5/ 5stars
great
Just awesome!!! - by ,
5/ 5stars
I bought this jig a year and a half ago and it has paid for itself more times than I could count. I did buy the kit with the line boring jig and those attachments are a must have for any cabinet maker and custom wood worker. This jig is engineered to perfection for putting handles on cabinet doors and drawer faces. I've used other jigs in the past and even made my own with fiber glass. But this jig just blows all the competitions away. I can't imagine doing my work without it. The inventor truly did his homework and made sure that his product is very well made I might add. I really really would incourage all professionals and DIYers to buy it. Y'all won't regret it.
one of the best tools I've purchased in years - by ,
5/ 5stars
This is, hands down, one of the best tools I've purchased in years. If you're on the fence about it because of the price, just buy it! You'll be glad you did!
Fortunately I found it on here and got it within ... - by ,
5/ 5stars
I had a used True Position jig that was missing this piece. Fortunately I found it on here and got it within a few days!
Four Stars - by ,
4/ 5stars
solid timesaver
install the handles was easy. Including door handles - by ,
5/ 5stars
Made drawer handle installation a breeze set for a size of drawer, drill the 2 holes, install the handles was easy. Including door handles, installed a total of 38 handles all in a couple of hours
Best investment for cabinets - by ,
5/ 5stars
Expensive but so worth it
Hardware simplified - by ,
5/ 5stars
This jig is the best jig out there. Despite being hesitant about the price I went ahead and bought this anyway. On average I use this jig to do 30 sets of hardware everyday. This jig it cuts the time of install of hardware in half and with no errors.
Well worth the $$ - by ,
5/ 5stars
As a handyman I have done several cabinet hardware jobs in the past with 3 homemade jigs with good success. The True Position jig is phenomenal! I only have to set it up once and away I go! Repeatable results and more efficient. I just installed 50 cabinet handles in 2 hours. The time it would have taken me with my homemade jigs would have been close to 3 or 3 1/2 hours! The holes are straight so there's no need to 'fine tune' any of the holes! I highly recommend this jig!! The only drawback is that it does not come in a case, only a cardboard box.
Five Stars - by ,
5/ 5stars
Its a beutiful tool , time saving.
Absolutely worth it - by ,
5/ 5stars
It's not cheap, but I was drilling the drawer fronts for our new kitchen. There was no way I was going to be the guy who drills the holes in the wrong spot. ('But honey, being asymmetrical is in style!') It's very well made and will surely last a lifetime. Lend it to your neighbor when they put in a new kitchen, and make friends for life.
Five Stars - by ,
5/ 5stars
👍👍👍👍👍👏👏👏
Awesome jig - well worth the money due to its ... - by ,
5/ 5stars
Awesome jig - well worth the money due to its flexibility and longevity. Don't waste your time with those flimsy plastic templates sold at the big stores.I did approximately 60 cabinet doors and 40 drawer pulls with 5' and 7' handles in about 7 hours with this, cleaning as I went. It produced fabulous results.A few tips: Every few cabinets, double check the tightness on all your settings. Use a quick clamp for high cabinet doors when you might to be on a ladder to reach. When doing false panels, such of those in front of sinks, double check your clearance behind the frame to the sink before drilling.
Awesome Tool - by ,
5/ 5stars
I am a finish carpenter, have been doing carpentry work for over twenty years and this is a tool I should have invested in years ago. By far the best cabinet door jig I've used to date. Was easy to set up, kept my drill bit straight and prevent flair out on back side of hole when using drill bit stop. I was able to cut my handle installation in half. Well built tool and durable, seems like it will last for years. My only gripe about this tool is the carrying case, it's card board would love for it to be some material more durable. I'm figuring if I keep by itself away from the other tools it will be fine. Thanks for a great tool Made in America.
Four Stars - by ,
4/ 5stars
overpriced like crazy but works nice. if you seldom install handles then making ur own jig is best.
Awesome Jig - by ,
5/ 5stars
This hardware jig works as advertised. It's fairly expensive but if you are mounting hardware with mounting holes over 5 or 6 inches its a great tool to own. You can set it up in a couple of minutes then you can zip through a room of cabinets very quickly. Its a very solid, well built tool.
Four Stars - by ,
4/ 5stars
Great jig does exactly what it claims !
Four Stars - by ,
4/ 5stars
I have owned a couple other jigs and this is the best
Awesome product - by ,
5/ 5stars
Awesome tool, pays for itself immediately. We use this tool daily and it makes boring for hardware so much faster and accurate. Highly recommended.
Easy To Use and Very Accurate - by ,
5/ 5stars
Love this jig! My husband installed all our new cabinet hardware in no time at all with this tool. It works great for super long pulls and is extremely accurate. It's a little pricey but would cost more to have hardware installed professionally. A great tool for the do-it-yourselfer.
Use was incredibly easy and no more false bottoms to build and install - by ,
5/ 5stars
This paid for itself in a single job. Use was incredibly easy and no more false bottoms to build and install. Do not hesitate to buy, it works beautifully.
Use was incredibly easy and no more false bottoms to build and install - by ,
5/ 5stars
This paid for itself in a single job. Use was incredibly easy and no more false bottoms to build and install. Do not hesitate to buy, it works beautifully.
Use was incredibly easy and no more false bottoms to build and install - by ,
5/ 5stars
This paid for itself in a single job. Use was incredibly easy and no more false bottoms to build and install. Do not hesitate to buy, it works beautifully.
Use was incredibly easy and no more false bottoms to build and install - by ,
5/ 5stars
This paid for itself in a single job. Use was incredibly easy and no more false bottoms to build and install. Do not hesitate to buy, it works beautifully.
There are many knob that can catch thinking you have the jig in the right place or it won't slide good on the cabinet giving you - by ,
4/ 5stars
As a pro for 20 years cabinet jigs are a must. Wether you make one your self or spend your life savings on this one. My last rockler jig got stolen this was my replacement. This jig is accurate however, I have drilled 3 holes in the wrong place since I got it. There are many knob that can catch thinking you have the jig in the right place or it won't slide good on the cabinet giving you the impression it's in the right place. You have to verify its right rather than just using the positive stops by feel.
Expensive, but worth it - by ,
5/ 5stars
This tool is not exactly cheap for a non-professional to use, but I had to place 30 drawer and cabinet pulls. This tool did the trick and made them all line up perfectly. In just a few hours, I had all the pulls done without the stress of everything looking uneven and wonky.
Made life easy. - by ,
5/ 5stars
Used for drilling guide of long handles. Superb quality. Made life easy.
Made life easy. - by ,
5/ 5stars
Used for drilling guide of long handles. Superb quality. Made life easy.
Convenient and easy to use. - by ,
5/ 5stars
Excellent product. I'm a do it yourselfer. This product worked awesome. If I was a professional cabinet maker or cabinet installer, I couldn't imagine not owning this guide.
Five Stars - by ,
5/ 5stars
It works great! Did exactly what I wanted to do.
Worth every penny. - by ,
5/ 5stars
Saves me so much time on cabinet door hardware.
Best thing since sliced bread - by ,
5/ 5stars
You can teach an old dog new tricks. Best thing since sliced bread. Installed about 275 knobs and handles on cabinet, in new house no problems. Well made, simple to use. Watch your fingers though, keep them away from drill bit!
Five Stars - by ,
5/ 5stars
True Position Drill Guide
Five Stars - by ,
5/ 5stars
True Position Drill Guide
Five Stars - by ,
5/ 5stars
True Position Drill Guide
Five Stars - by ,
5/ 5stars
True Position Drill Guide
Excellent jig. - by ,
5/ 5stars
This jig is better than anything else I've used in 35 years of cabinet work. Well worth the money, it will pay for itself quickly. Very precise and almost foolproof.
Five Stars - by ,
5/ 5stars
I've been looking for a precision jig like this for years. It is everything I was expecting and more
Excellent tool. - by ,
4/ 5stars
Spend the extra money and get the wider version. Excellent tool.
Very nice jig - by ,
4/ 5stars
I am a kitchen & bath remodeler and have been installing cabinetry for approx. 20 years now. I have been using a jig made by EZ Jig for all those years, which works very well for a lot less money. The problem is that it does not do handles that are wider than about 6', and there is no quick adjustment. This is where this jig shines.Most of my jobs involve installing knobs or handles which are 6' or less. But because of a current job which required installing a variety of very long handles, I finally decided to pay the price for this jig. It worked VERY well and I am glad I bought it.Pros:AccurateWell-machinedLight weightEasy to adjust with no toolsCons:Over-priced in my opinion. I certainly do not mind paying higher prices for higher quality, and this is higher quality, but not THAT high. I was once a machinist and I can appreciate the quality of the machining on the parts for this jig, but I think it's over-priced. Having said this, it will pay for itself in my line of work.Cheap cardboard case. At this price, one would expect it to come in a decent molded case of some sort. Every other tool at this price does. I suppose if one is careful enough, the cardboard case will suffice. Time will tell.
Looks good, haven't used it yet - by ,
4/ 5stars
Looks good, haven't used it yet, but it appears to be An accurate devic
Slippage - by ,
3/ 5stars
Settings do not 'lock'. They slip too easily.
Five Stars - by ,
5/ 5stars
Great
Nasty little quirk - by ,
3/ 5stars
The jig to me is worth the money. It's expensive but does save on set up time and having to build quick individual jigs. BUT.... It has nasty little problem. The stop for drilling doors has a beveled shoulder on it that can catch the drawer/door edge before the blade of the stop does... This causes about a 1/2---9/16 error in hole position. The point of this jig is to be able to set it and go... But I know find myself really double checking were it is because I don't trust it...certainly not something I would have a helper do anymore. This now takes me off more important install tasks.... So well made but not sure I won't go back to homemade jigs that don't require helper supervision.
A good investment. - by ,
5/ 5stars
Well worth the money. A good investment.
Great Product! - by ,
5/ 5stars
This drill guide is phenomenal. As a novice, I installed 47 pulls over the weekend on a variety of doors and drawers. The drill guide made it super easy to make perfect holes from one drawer and door to the next. I have 120mm hardware that none of the standard templates worked with. This product is worth every penny for anyone from a DIY to a professional.
Five Stars - by ,
5/ 5stars
Worked great! Saved me a ton of time
Worth the money - by ,
5/ 5stars
There were over 50 pulls and knobs in our project, and this tool helped make everything perfect. We had mostly 6' CTC pulls, and none of the plastic gizmos could handle the spread. This jig is everything you need to masterfully apply all your 'cabinet jewelry' with ease and with professional results. It's worth the money and I'm glad I bought it.
Sooo much faster - by ,
5/ 5stars
I'm a cabinet installer and bought this tool a year ago. Perfect tool but just keep an eye on the operator. Its so fast that easy mistakes are made. Slow down a little and always double check your numbers. As far as the card board case that it came in,that went right in the garbage. I bought an aluminum pistol case and fits perfectly. Expensive tool so protect it.
Worth the price - by ,
5/ 5stars
A good buy, you get value for your money.Product well made and very good quality.Installing handware like a piece of chocolate
Five Stars - by ,
5/ 5stars
excellent addition to their drill guide for drawer and door handles.
Five Stars - by ,
5/ 5stars
excellent addition to their drill guide for drawer and door handles.
Worth the Investment - by ,
5/ 5stars
The tool was a lot more than we wanted to spend but given that we had 70 drawers and cabinets, we went ahead and purchased it. The time and effort it saved made it totally worth the investment!!!
Absolutely perfect. I have a remodeling company doing kitchen and ... - by ,
5/ 5stars
Absolutely perfect. I have a remodeling company doing kitchen and bath remodels. We use a lot of odd sized cabinet hardware and this cuts the hardware install time by 75%. EXTREMELY well made. I also got the shelf pin hole extension arms. Well worth the money. Paid for it self in employee labor time saved on two jobs. I did go to Cabela's and bought one of their nice padded pistol cases that has the foam inside where you make your own custom cut outs to protect from damage as this is a precise instrument that you don't throw in the toolbox
Five Stars - by ,
5/ 5stars
Stop Reading the reviews and just buy it
Knob and Pull Jig - by ,
5/ 5stars
Pricy but works great. If you are only putting on a few pieces of hardware probably not for you. However, if you are poutting on a lot of hardware repeatedly its a good investment.
I'm a journeyman cabinet installer I used to hate making jigs and doing hardware Now it's no problem ... - by ,
5/ 5stars
I'm a journeyman cabinet installerI used to hate making jigs and doing hardwareNow it's no problem This is the best hardware jig on the marketI subcontract for home depot I install a kitchen a weekI love this toolJust buy it if you do a lot of hardwareBe careful and don't drop it like I did.It went out of square a bit so I bought a replacement 'T' partGreat tool
Love this Jig made short work of installing drawer and ... - by ,
5/ 5stars
Love this Jig made short work of installing drawer and door pulls. Really well made and accurate.Too bad it doesn't have a good case to protect it, but is well worth the money.
Five Stars - by ,
5/ 5stars
it's was a perfect fit.
Really good quality and strong for the job - by ,
5/ 5stars
Really good quality and strong for the job.But specially good design and fast shipping.
It's seems expensive but after you do your first kitchen you are happy you paid the price - by ,
5/ 5stars
The only jig I would ever consider buying again for handles and knob. It's seems expensive but after you do your first kitchen you are happy you paid the price.
Pretty Amazing Jig - by ,
5/ 5stars
Honestly if you are doing a lot of holes you simply cannot afford not to buy this product! Work out the cost for any damaged doors and with quotes of around $4 a hole.....I am not the greatest DIY guy but the jig was a breeze to use. I cannot speak highly enough of this product.
Five Stars - by ,
5/ 5stars
Like the title say...truly precision! Built and designed super well and made in USA.
... a all day task down to 30 mins works great only thing i would say is they should make ... - by ,
5/ 5stars
take a all day task down to 30 mins works great only thing i would say is they should make a nice case for it instead of the box
save time and makes me money - by ,
5/ 5stars
Turning hours in to minutes. I am a professional carpenter and I am always looking to do things faster with out cutting any corners. Great jig!
Worked perfectly. Buy this. - by ,
5/ 5stars
Amazing. Did our entire kitchen cabinet doors and drawer fronts in one day. Everything lined up perfectly and consistently. Don't bother trying to make a plywood jig or worse, a cardboard one. Bite the bullet and pay for this thing. It worked beautifully.
OMG - a tool that I would frame if I could! - by ,
5/ 5stars
Truly worth the cost! I'm a common DIY homeowner who had a $2,500 vanity installed by a carpenter who had to leave before he could install the handles (handles were special order and didn't arrive on time). I found MUCH cheaper plastic tools and read where people used cardboard, etc. Then I found this. I had to talk my wife into it but she finally agreed. I didn't want to use cardboard or chance our expensive vanity to a piece of plastic. Further, it would cost just as much to hire a carpenter to come out and install 15 handles.Jig arrived and after spending 20 minutes reading the literature and lining it up on a practice cabinet door and adjusting the components, I was ready. Adjusted the jig to where I wanted to drill the holes, lined it up and using my drill went for it. Jig didn't move at all and hole was drilled perfectly.1) I went ahead and purchased the drill bit Amazon recommended...2) Our handles were six inches on center - this worked perfectly!3) Job was extremely easy and very quick to drill 30+ holes4) I removed drawers and doors to make drilling easierAfter I was done with the vanity, I as worried that I wouldn't have another use for the tool for a long time, if ever. Well, that proved wrong yesterday as I had to install a toilet paper hold. The directions called for two holes, 160mm apart. I was able to use this jig for that job and it worked perfectly. Other uses? Anytime you need to transfer the layout of two or more holes from something you want to mount on wall - which is something I do a lot of!Bottom line - money WELL spent with this...
It's worth it - by ,
5/ 5stars
Worth every penny and it was easy to use! Measure twice, adjust and drill over and over again.
It's worth it - by ,
5/ 5stars
Worth every penny and it was easy to use! Measure twice, adjust and drill over and over again.
Excellent tool - by ,
5/ 5stars
I rarely take the time to write reviews. I am not a carpenter, but a medical professional. I am somewhat of a perfectionist. A recent kitchen remodel, 35K in cabinets and some quality issues will some contrators, I decided to do over 100 handle holes myself. The True Position Drill GuideIs simply one of the best, well made and most accurate tools I have ever brought. I save $1000 in labor cost and had perfect cabinet handles.
Five Stars - by ,
5/ 5stars
Great time saver! Well worth the price!
More than pleased - by ,
4/ 5stars
I've only had this jig for a couple of weeks but it has saved me a lot of time! I'm a cabinet installer and highly recommend this jig. Only four stars because there is a very popular type of knob that has two holes 1' apart and this will only go to 1 1/8' at minimum. Aside from that, if you're installing cabinets for a living this is a must have.
Five Stars - by ,
5/ 5stars
This tool make installing hardware easy
Completely agree with other review that I am so happy I spent the money to buy this - by ,
5/ 5stars
Completely agree with other review that I am so happy I spent the money to buy this. The thought of creating custom jigs to drill cabinet hardware wholes was daunting. After doing some research and finding this product I was initially hesitant because of the cost. Once I got past that and purchased it I have been very happy with it. This jig allowed me to really fly through the install of hardware on all of the cabinets in my kitchen. That then allowed me to use it for the draws and doors in my bathrooms as well. This product give me the confidence needed to complete my projects and I don't fear any future projects that require measured pre-drilled holes.
... a pain in the neck this makes it SOOOOOOO easy wish I had it years ago well worth every ... - by ,
5/ 5stars
OMG I wish I invented this I have been installing kitchens since 1983 and hardware has always been a pain in the neck this makes it SOOOOOOO easy wish I had it years ago well worth every penny all the installers I work with that see it are buying them!!
Five Stars - by ,
5/ 5stars
This is proof that having the right tool makes a difference! It took the stress away!
Excellent tool - versatile - well made - by ,
5/ 5stars
Excellent, well manufactured product with clear, easy to follow instructions. I consistently drilled straight, accurate measured parallel holes for long pulls quickly. Made installing crystal knobs in the exact right place a breeze. Take the time to set the hole guides where they should be for any size pull, lock the placement with machined precision and it’s an excellent tool.Yes, it’s more $ than the plastic guides but if you want first-time, no mistakes high end results quickly this durable tool is the unit. And, its machined in the US. BTW, I paid full price for it.Perhaps not required for shorter cabinet pulls where being off plumb is not going to create an issue, but this is a superb product for accuracy and speed of install. I had to install some long pulls with narrow bases ( Alno A419-6-CHBRZ) on 42” painted cabinets. If the install is was off plumb on side by side by side doors or the pulls did not exactly match height it will be noticeable. With the A419s there is essentially no room for error. The base, where it touches the cabinet, is VERY narrow. Those how to videos that say use a bigger hole size to allow wiggle and adjustment would cause a hole that will be seen, especially as the handle shifts in daily use.Back to the unit, it even comes with a quality 5mm drill that fits the machined guides perfectly. The 5mm will be fine for most applications.But if you want finer precision, as I did for A419s, I used the tip of a 5mm bad point bit to lightly mark exact hole center. Removed the guide and used a 5/32 brad point for the actual screw hole. My old Ryobi 18V has a fairly accurate bubble level to guide level and by looking down on the drill I could keep the hole darn near exactly 90 degrees. With the holes marked exactly where there should be on all the doors and drawers, and tightly holding narrow bases with no slop, its quality.Summary: great tool – machined and marked well. Produces accurate results with any size pulls over and over quickly.
Five Stars - by ,
5/ 5stars
Well worth the money. Top quality.
Five Stars - by ,
5/ 5stars
Very good tool
Five Stars - by ,
5/ 5stars
It has save me a lot of time and effort,
Great tool for custom placement - by ,
5/ 5stars
Works like a charm! Not being a skilled contractor I purchased this to make sure my holes were drilled based on the jig rather than rely totally on the plastic template. The plastic template worked well for most of my handles that were smaller but what I liked most about this jig is the ability to screw the handle into the jig itself so you can line up the alignment right on the door. The plastic templates are great if you want the standard positions. If you want a more custom look but still want to DIY then this tool is worth the investment. I am installing cabinet hardware throughout the home and this tool has certainly reduce the time and provided a higher level of confidence during install.
Five Stars - by ,
5/ 5stars
ALL MY HANDES ARE PERFECTEZ TO USE
Five Stars - by ,
5/ 5stars
great tool. HUGE time saver
A Must-Have! - by ,
5/ 5stars
OMG, don't install cabinet/drawer hardware without this. This is a must-have for perfection! It cut my installation time significantly and it all came out so perfect. Looks like it was professionally done. Who says a lady can't be handy?!
This tool is without a doubt the best tool for the job and in my opinion well ... - by ,
5/ 5stars
I work construction in multi million dollar houses that are very large and have a lot of cabinets, this tool is a HUGE time saver in my world!! I used to measure mark and drill all my holes individually and I would sometimes take a few hours to mark and drill cabinet hardware in a kitchen, now it takes about 20 minutes or less. This tool is without a doubt the best tool for the job and in my opinion well worth the money. It's design is well thought out and construction is very sturdy I love that it not only has inch marks but also has millimeter. I wish it would come in a plastic hard case but I bought a plastic handgun carrying case that works just fine for storing the tool.
Well worth the money as this jig is very easy to set up and use. It paid for itself after two jobs. - by ,
5/ 5stars
I have been in the cabinet industry for 27 years and this is the best hardware jig I have ever seen and used. The set up for handles takes seconds and does not require a tape measure or tools to accomplish.The only thing that would make this jig better is if the width was longer. I ordered the line jig today as I have a job coming up that will have very long pulls.
Excellent tool. Makes quick work of cabinet hardware - by ,
5/ 5stars
Excellent tool. Makes quick work of cabinet hardware. Just make sure you have it against the stops or you will make a lot of mistakes quickly.
Great product. When working with high end cabinets - by ,
5/ 5stars
Great product. When working with high end cabinets, one mistake can cost you hundreds of dollars. It is well worth the price.
Well worth it. - by ,
5/ 5stars
So let's just get this out of the way; this thing is very expensive compared to other options. But good gracious does it work!I had 50+ pulls that were both 128mm and 160mm, in addition a 9' appliance pull, and then some knobs. It's really hard to overstate how easy this jig made the whole process. Set your depth to 1/2 drawer height (assuming you want it centered), set your width to 1/2 handle width (64mm/80mm respectively for my handles) then align the jig with the centerline that you've already marked on some blue tape on the front of your drawer. Then drill.Amazingly fast and accurate.I finished in under 3 hours for an entirely new kitchen. I did not have a single mis-drill.I might try to resell it to get some money back, but let me tell you the cost of mis-drilling one door/drawer would have been about the same price as this jig. Well worth it.
Worth every dime. - by ,
5/ 5stars
This jig is absolutely awesome! The only thing better than this jig is the customer service. I recently called to inquire about some other products and received the best phone service I have ever encountered in my life. It is so refreshing to see a company out there that actually has their act together. Thank you true position!
Five Stars - by ,
5/ 5stars
Best tool for hardware.
Saved me a ton of time - by ,
5/ 5stars
I purchased about $23,000 worth of Dura-Supreme cabinets. I had my designer/contractor install the cabinets, but they wanted charge extra to install the hardware (2 guys for ~6 hours). That would have cost over a $1,000 in labor....yes, maybe my contractor is high, but you don't want a couple of hacks working on cabinets that cost that much.I bought this tool and installed the hardware myself. This tool saved a TON of time. Once you get it set up for your cabinet door knobs, you just drill and go the the next cabinet door and drill, repeat, repeat, etc. Same with the drawer fronts, although you do have to adjust the tool of you have different drawer front heights. Nonetheless, this tool saves a ton of time.I was able to successfully install all knobs and drawer pulls without any errors. That is huge because if you screw up with the placement of the holes, you will be buying a new cabinet door or drawer front. Spending $175 on this tool is a no brainer if you are an accomplished DIY'r or professional.
Five Stars - by ,
5/ 5stars
Thank you
If you're looking for precision... - by ,
5/ 5stars
The device was incredibly easy to set up. Just a few measurements and off you go. The reviews were also very helpful. I read every one of them because it's a sizable purchase if you're going to use it only a few times. So please keep that in mind. More than satisfied with the purchase. Good luck!
Local cabinet installer wanted $3. 50 per HOLE (not ... - by ,
5/ 5stars
Local cabinet installer wanted $3.50 per HOLE (not per pull) so the cost of the tool paid for itself in it's first use. I installed 90 drawer and cabinet pulls in matter of a few hours and every one of the pulls were perfectly aligned and placed. I'm sure that I will use it again over the years or I'll lend it to my family & friends.
True Position Hardware Jig - by ,
5/ 5stars
My husband and son love the True Position Drill guide. It's well made and provides a true guide for drilling holes. It's perfect for woodworking projects.
I professionally install cabinets so this is a worth while investment (I would not recommend for the weekend warrior) - by ,
5/ 5stars
Definitely a bit pricey, I professionally install cabinets so this is a worth while investment (I would not recommend for the weekend warrior). My only complaint with this tool is that you have to continually tighten / make sure the hole spacers are where they should be and tightened down. I guess every tool has its pros / cons. Overall an awesome tool.
Great jig for the professional installer. - by ,
4/ 5stars
If you install hardware on a regular basis this is the jig you want. It will pay for itself in one or two jobs. The only issue I had was learning that the set screws have to be very tight or they will loosen up and the guides will start to move. The set screws need to be slightly more than finger tight. Or put some Teflon tape on them so the screws do not loosen up for a finger tight snugness. I am going to get the jig for drilling shelf pin holes that goes with this system because I like the quality of this jig so much.
Just the best tool ever. - by ,
5/ 5stars
just the best tool ever
HANDS DOWN BEST JIG FOR INSTALLING CABINET HARDWARE! - by ,
5/ 5stars
Hands down the best cabinet hardware jig you can buy for installing cabinet hardware!I am a professional carpenter and this is the only tool I use to install hardware on all my cabinet sets. This tool is amazingly accurate and can be used on all types of cabinets, recessed or flat.It can cost you more than the price of this tool if you mess up one of your cabinet doors or drawers. This will help take the chance for errors drastically down. Small, light weight, we'll built aluminum, tough tool!This is expensive because you will never have to buy another one.The only thing that will eventually wear out is the steel guides, but they sell them so you don't have to buy the whole tool again. I have personally used this tool to put hardware on over 75 cabinet sets and I am nowhere near replacing the guides yet. I'm thinking about 300 to 400 sets and I will have to replace them. This tool is worth every penny for pro's and amateurs alike!
it's not cheap but it is truly a great tool -- for accuracy and time-savings it's the best ... - by ,
5/ 5stars
Don't even try to do a kitchen without this jig!!! Yes, it's not cheap but it is truly a great tool -- for accuracy and time-savings it's the best thing I have found when mounting knobs and handles. It's very easy to set up and once you have checked your setting you just go! I did a kitchen with 75 handles in less than 2 hours, another one with 30 handles in about an hour. If you're doing an IKEA kitchen you will be really happy because the True Position is also labeled in metric.
it works - by ,
3/ 5stars
Overall great product. It does take a bit to figure out exactly how to use it. Also, guides could be made to clamp more securely. It would be great if it could clamp to the drawer/door. It can be difficult to hold while drilling. Also it's extremely overpriced for a couple of metal rulers fused together with a couple of guides attached. Could probably get by just fine by making your own jig out of plywood, but I wanted a tool that would make the process easier, that I could use again later if needed.
Five Stars - by ,
5/ 5stars
worked well on one small job. It will be tested on bigger jobs soon
excellent product. - by ,
5/ 5stars
high quality...excellent product.....not inexpensive...but the only way to go if you have more than a few to install...turned a major project (90 holes to drill) into a 'cake walk'
Well worth the money - by ,
5/ 5stars
This tool is now one of my most prized possessions. Would never install another cabinet handle without it. Installed 28 cabinet handles and drawer pulls in less then 3 hours.
Five Stars - by ,
5/ 5stars
a must for a perfect job
Five Stars - by ,
5/ 5stars
this is hands down the greatest tool for any high level carpenter or at home hobbiest.
Great Product - by ,
5/ 5stars
Used it many time and Love it. Well designed and well built. So I have every confidence that when I set this up for cabinet pulls, the holes will need to be where they are supposed to be - Spot on.
Great Product - by ,
5/ 5stars
Used it many time and Love it. Well designed and well built. So I have every confidence that when I set this up for cabinet pulls, the holes will need to be where they are supposed to be - Spot on.
Great Tool. - by ,
5/ 5stars
Great tool - designed and built well. I know that when I set it up, the holes will be where they need to be.
Five Stars - by ,
5/ 5stars
Great tool!!
great tool, extremely accurate - by ,
5/ 5stars
great tool , extremely accurate , a real time saver
I didn't feel like making my own jig - by ,
5/ 5stars
We remodeled our kitchen ourselves and the last part was installing the hardware. Of course, we wanted the new cabinets pulls that are so big and none of the guides we could find would fit. I didn't feel like making my own jig, so I got this one. It's pricey, but worked like a charm. I am impressed!
Top Quality - by ,
5/ 5stars
I have to give this item 5 stars because of it's quality. However, it isn't as flexible and the description suggests. The guide holes wouldn't line up with the very first handle I tried to install.
Top Quality - by ,
5/ 5stars
I have to give this item 5 stars because of it's quality. However, it isn't as flexible and the description suggests. The guide holes wouldn't line up with the very first handle I tried to install.
Top Quality - by ,
5/ 5stars
As I wrote for a similar item, I gave this item 5 stars for it's quality in manufacturing. However, it isn't quite as flexible as the description suggested. The guide holes didn't line up for the very first handle I tried to install.
Totally worth it! - by ,
5/ 5stars
I purchased this to install cabinet pulls in my new house. I was a little hesitant since it cost so much, but wow, this thing is amazing. Its perfect for installing cabinet hardware larger than 3'. I was able to install 6' pulls throughout my house.Plus it has drill guides directly on the jig so its literally just set it and start drilling. Drill bit included too!If you have any doubt about if this is worth i just think about why to buy it:- Larger than 3' pulls- Want drill bit guides to stabilize drill holes- easily repeatable results on all cabinets
Five Stars - by ,
5/ 5stars
Couldn't have been more satisfied would recommend highly
This is an excellent tool, well built - by ,
5/ 5stars
This is an excellent tool, well built, easy to use and accurate. Makes all you hardware look professionally installed.
Performs Like It Should. - by ,
5/ 5stars
I purchased this along with other tools and accessories for my husband's contractor assembly and installation business. I asked him forfeedback about this drill guide. He stated he likes it very much, performs like it should, but to double-check to ensure it stays tight and doesn't loosen. Otherwise guides your bit perfectly!
VERY easy to use and extremely versatile - by ,
5/ 5stars
Outstanding, PROFESSIONAL tool. Saved $750 putting all the handles and drawer pulls on in our new house. Pros often charge $1 per hole... do the math. Paid for the device with savings in the kitchen alone. VERY easy to use and extremely versatile. Not anything like the little flimsy cheap plastic guides. This is quality aluminum with hardened steel guides for the drill bit. Makes FAST work of installing a whole series of knobs and pulls. Easily adjustable for almost any configuration. HIGHLY recommended.
I am a kitchen installer and usually make my own ... - by ,
5/ 5stars
I am a kitchen installer and usually make my own jigs for handles and knobs but since I purchased this I wonder how I have gotten along without it . the ease of use and accuracy is incredible will be buying another for my other crew soon. thanks for offering this product on your site.
Five Stars - by ,
5/ 5stars
Good quality, easy to use.. Makes it a real ' hardware installation system'.....
A quality Jig that every Cabinet hardware installer should have in their tool bag. Easy to set up, very accurate, very repetable - by ,
5/ 5stars
one of the best tools a true craftsman should have in their tool box. I recently did a job with 38 sets of holes, that's 76 separate holes.. Before this trusted tool you would have to measure for each hole, then drill the 76 holes hoping you were dead nuts on. Chances are you may be a fraction off using this old method ... of measuring for each hole. With my new 'True Position Hardware Jig' no problem... just set up the drill guides, measure the positing for each set of holes, set up your ' drill guides, and you will be ' dead nuts on'. No more guess work or hoping you measured all 76 holes correctly. With this jig no guess work, just measure for positioning centered or what ever the drawer calls for and you will be ' dead nuts on' each time.This jig has helped to cut my hardware installation time by more then half, and with less guess work and hoping you got it right... It's worth the money and in the end you can do more hardware installations which means a better job and more of them as a result, Production is up, revenue is up, and my time spent on the job for hardware installation is cut by more then half. Every true craftsman should have the ' True Position Hardware Jig' ....Thank you Joe V, Omaha, NE
This is the Best jig I have ever used for door and drawer ... - by ,
5/ 5stars
I'm a cabinet builder who has been in business for over 20 years. This is the Best jig I have ever used for door and drawer hardware.
Don't even hesitate. This thing is awesome! - by ,
5/ 5stars
This tool is worth its weight in gold if you're installing cabinet hardware. Loved it! I'm a little sad all of my hardware is installed, I want to use it again. The key is the setup, obviously, and making sure you made your measurements and placements correct. Once you get it setup (which is pretty easy) things fly along. There's little room for error as long as you're careful. I installed hardware in a kitchen, two bathrooms, and a laundry room in under 2 hours. It's expensive, but not bad considering the cost of replacing a mis-drilled drawer or cabinet, or the amount of time you'll save.
Great Quality - by ,
5/ 5stars
This is a fantastic Made in America tool. It is well built and I expect it will last a long time. I was also pleasantly surprised that it is packaged in a sturdy re-usable cardboard container to prevent damage in storage. My one complaint would be that for the price of the tool, I would expect the directions to be much better. They were a bit confusing and hard to follow, but a little common sense will prevail.
This does what it says it can do easy to use great - by ,
5/ 5stars
This does what it says it can do easy to use great tool
Worth having in my tool assortments - by ,
5/ 5stars
I little pricey for a jig to just put handles on, but honestly it's well made and when you do a few kitchens you are thankful that you have it.
Five Stars - by ,
5/ 5stars
Great Tool very easy to use.
Five Stars - by ,
5/ 5stars
easy set up for multiple width doors and drawers.
Five Stars - by ,
5/ 5stars
Excellent tool.
Bite the bullet and buy this jig - by ,
4/ 5stars
Very easy to use. Ensured that each set of holes were in the same location for each door. My wife is very picky about details and this jig was able to meet her expectations.Would have given 5 stars but it's difficult to keep the thumb screws tight in guide placement. Having some nylon locker on the threads or lock washer would be helpful.Almost drilled a set of holes in wrong place but caught it as I had both marked holes with fine tip sharpie and double checked alignment of jig with existing holes. This only happened once as I would check thumb screws after drilling every pair of doors.Being able to flip jig for left / right or upper/ lower is a gem. Also the storage box will ensure the jigs longevity and prevent it from being banged around with other tools. Box makes it easy to store.Forget about the fixed position plastic jigs. If your doing multiple door / drawer layouts with different spaced hardware this is what you want.FYI - I was using 96mm spaced hardware. But jig is adjustable for a wider or smaller sizes.
Must have tool for long handles - by ,
5/ 5stars
I had the smaller jig before this (TP-1934), but ran into a couple of jobs that needed 480MM handles. I could have bought the extension bars separate but I like having one of these in the shop and one in the field, so I bought this from Richelieu. The newer handles I've been seeing more of have VERY small profiles on the sides, so you have to be dead-on. There isn't the wobble room for straightening out the hole, so I have found this jig to be the perfect fix. I've used it a few time for line boring but mostly longer handles. If you haven't used one of these tools before, stop thinking about it and buy it! You will thank me later :) This tool paid for itself on it's 2nd job. I dont own many tools that I can say that about!
Worth Every Penny - by ,
5/ 5stars
Worth every penny. That is the only way I can describe this. I am a complete DIY'er and after these cabinets, I really do not have an immediate need for this. I am keeping it though. This really is not all that expensive considering you are drilling holes into cabinets that are worth thousands of dollars. For those who work in the industry mounting cabinet hardware, surely this tool is a time-saver.I have only done the doors so far as I am waiting for the drawers pulls to arrive. With this tool, I was able to mount the hardware on over 30 doors in just about an hour and they all look perfectly aligned. The hardest part was figuring out the initial setting of where I wanted the knobs located on the doors. Then it was just put on, drill, screw, repeat.Of course I wish it was less expensive, but for something that seems so simple, it is truly worth every penny.
Five Stars - by ,
5/ 5stars
This is PROFESSIONAL grade strength stuff. It will last a long time.
money well spent. - by ,
5/ 5stars
Great product. One of those why didn't i think of it. I am a full time cabinet installer worked great. I used it for the first time today 2 small issues i had with it still bit that came with it snapped on me about 20 holes deep. Also when i lined it up exactly on points it didn't match up about 32 off, but other than that saved me easily half the time. Would be helpful to have some type of plug to throw in when drilling handles to keep it exact.
Five Stars - by ,
5/ 5stars
The best jig ever , saves time and costly mistakes,
Works fine. Easy to use - by ,
4/ 5stars
Works fine. Easy to use. Down side, For this price you should get the attachments with it. You are limited with just this unit
Four Stars - by ,
4/ 5stars
very helpful to make the holes for handle!
Awesome Tool - by ,
5/ 5stars
This jig was worth every penny. My wife and I installed over 50 handles in our kitchen in about two hours and everything came out perfect. Saved hours of time and grief trying to line everything up with a paper template or cheaper jig. Highly recommended.
Great Product - by ,
5/ 5stars
None of my cabinets in my entire house (bathrooms, kitchen) had pulls and handles. I was always reluctant to start the project due to not being able to precisely place the holes in the right spot. This jig made the whole project effortless. Great product.
Five Stars - by ,
5/ 5stars
Best hardware tool in the market.
Three Stars - by ,
3/ 5stars
The unit is smaller than I had anticipated.
Easy to use - by ,
5/ 5stars
Easy to use. Perfect alignment on the knobs and pulls I installed in my new kitchen. Was so happy with it, my bathrooms and laundry room also have new hardware!!!
Five Stars - by ,
5/ 5stars
great tool except, it should be longer for wider handles
Best jig out there for hardware install - by ,
5/ 5stars
Must have product for professionals or DIY-ers. Great easy to use and well made here in the USA. Price might seems a little high at first, don't worry it will pay for itself in the first job. Also I don't mind paying for quality product and support a small US business who is kept manufacturing in the country. I used many other different types of jigs and used different methods by far True Position jig is the overall winner.
Five Stars - by ,
5/ 5stars
Good
Five Stars - by ,
5/ 5stars
Good
Great product. - by ,
5/ 5stars
Will buy again. Great product.
Five Stars - by ,
5/ 5stars
super nice jig am getting a second one for my son.
well made and easy to use - by ,
5/ 5stars
this tool is the bomb wouldnt go to work with out it. well made and easy to use. if you make a mistake with cabinets you can usualy fix it but if you drill a door or drawer wrong you are sunk. i highly recommend this tool
Five Stars - by ,
5/ 5stars
Absolutely the best jig ever. Totally worth the $190 bucks. This tool is awesome.
Only weak point is the set screws can come loose due to the fact that the metal that the point presses against is hard and so it - by ,
5/ 5stars
FABULOUS! If you install cabinets and hardware for a living you need to get this guide and throw everything else away. It will pay for itself in one job.Only weak point is the set screws can come loose due to the fact that the metal that the point presses against is hard and so it doesn't get as tight a grip as I would like. To avoid problems I regularly check the tightness of them. If they were to make the threaded point of a softer metal so it locks tighter that might solve the problem,
Excellent--highly recommended. - by ,
5/ 5stars
I bought this jig after using handmade jigs that I would make as necessary. They were made in the field, and sometimes were slightly off by 1mm or so. On a large handle, or row of cabinets, that can be very noticeable.Now with this jig, drilling for handles is DEAD ON ACCURATE EVERY SINGLE TIME. This jig is solid and extremely well built. The box doubles as a cardboard carrying case so it sits on the shelf in my truck rather than bouncing around in the toolbox. (The box will eventually need to be replaced--it's not a hard case, unfortunately).The options are endless with this jig. It is a bit pricey, but you will not regret it.I have also purchased the line boring extensions (you can buy the whole thing as the TP-1935 kit). I look forward to using those for drilling holes for those custom jobs that hard to program on the CNC.UPDATE:After purchasing the add-on line boring extensions, I still can say this is a VERY well built, well put together jig. They all fit in one case which is nice. The line boring extensions are very well built with nice bushings. All in all it is an EXCELLENT purchase. The precision of the markings on the jig is dead on accurate and very easy to line up and set with the set screws.A few comments:When using the line boring extensions: Start by registering one end of the extensions overlapping with an existing hole, if possible. Put a drill bit in there to hold it. I found that there is some flex over the length of the entire jig, so measure the distance perfectly and drill one hole on the other end and put in a drill bit or 5mm peg to hold it. Then drill the bulk of the holes. Otherwise, you may be off by 2-3mm which is more than enough to throw things off.The drill stop collar that is included with the drill bits is junk. Throw it away and get a decent set of drill stops for controlling the depth of the drill. I purchased these and i am happy with them: General Tools & Instruments S838 6 Piece 3/16-Inch to 1/2-Inch Drill Stop AssortmentI wasn't very impressed with the included drill bits either. I was drilling melamine and they had some tear out. I found putting a strip of blue painters tape under the jig helps. And apply pressure to the jig where you are drilling. That should help with tear out. Same on the back side, if you are drilling holes all the way through the material.
top quality. made installing hardware a breeze on 50 ... - by ,
5/ 5stars
top quality. made installing hardware a breeze on 50 cabinets.
Great time saver - by ,
5/ 5stars
Worth every penny' I'll second that!Used Festool 5mm drill bit.
Nice! - by ,
5/ 5stars
Expensive, but made installing non-standard (european) drawer/door pulls throughout the house, a piece of cake.
Great quality product - by ,
5/ 5stars
A must of cabinet makers and anyone who installs cabinet handles.
Five Stars - by ,
5/ 5stars
Great product!
Makes installing the final touch on cabinets a snap. - by ,
4/ 5stars
Seems expensive - but cheaper than getting a handy person to come out and install door handles on kitchen and bathroom cabinets on the level. And way cheaper than screwing it up free hand, and having to live with your partner's dirty looks every time s/he uses the off kilter handle.Simple to use - but take your time: remember your cabinet doors/drawers may not be exactly the same - ya' still gotta measure at least once.Well constructed and sturdy - but still wouldn't recommend dropping it from a ladder (It is a little ungainly to juggle along with a drill, screwdriver and a handful of hardware: but I doubt you will do this job unsupervised!)
Finally a profession tool for large pulls, speed and accuracy! - by ,
5/ 5stars
I'm a professional renovation contractor. My biggest fear is drilling hole is expensive cabinets that I just installed and putting them in the wrong place. Also when I have twenty or so handles to install the more repetition I can do, the faster I can get done. This jig, ( actually a tool as jig is to unkind a description) allows for accuracy, repetition, and no errors ( if you're paying attention!). The best thing is that you can set up to center a pull or knob on a set of drawers and even if the depth of the drawer front changes you will still be centered, just reset for the depth. I just installed a bunch of cabs that had a 6x 20 drawer up top and on 6 different cabs and 2-10x10 drawers under the top drawer. I did all the upper 6' drawers, then reset set for the 10's. All of them came out perfectly centered and all were the same dimension down on each set of cabs. The trick is to make sure all the cabs draw front are lined up and index from the same side of al the drawers. I also used a laser to take the mid pointy of the top drawer and transfer it to the lower drawers. So if the drawer fronts were slightly misaligned you couldn't tell visually.Also this was the only tool ( jig) that works with wide spread handles. I was working with 10' wide pulls and I think it can go to 12' or larger.Stop reading and buy it!
Five Stars - by ,
5/ 5stars
Great tool!
wasn't aware - by ,
2/ 5stars
I wasn't aware the square didn't come with it. I think it's over priced for what I got
wasn't aware - by ,
2/ 5stars
I wasn't aware the square didn't come with it. I think it's over priced for what I got
Sturdy fairly easy to use - by ,
4/ 5stars
Sturdy fairly easy to use. A bit more instruction would be good other than what comes with the jig. Satisfied with results.
Five Stars - by ,
5/ 5stars
It works really good
The name says it all! - by ,
5/ 5stars
This jig is a must have if you're a cabinet installer. I was using the Sommerfield jig, until the last job and it kept messing up.Doors are NOT cheap to replace!It is a bit pricey, but the results are always accurite, so therefore it's like the old saying,'You get what you pay for.'Overall I give it a 5 star rating.
True Position Hardware jig - by ,
5/ 5stars
Expensive at first blush, but built to last forever! I have an older one about 15 years old, and a newer one. Bone is kept in the work van, one in the shop. Accurate, easy to use, incredibly versatile for door ad drawer hardware.
An absolute must have! - by ,
5/ 5stars
Simply a must have tool for the finish carpenter. Do the math, set the jig and bore away. I do all the doors first, then the pull outs (trash, recycling, etc) and then the drawers. Only way to screw up is with a mathematical error. I honestly don't remember how I installed hdw without this tool. And as an example of how great it is, I can install an average 30-40 box kitchen in under 30 mins.
Hardware Install - by ,
5/ 5stars
My cabinet installers were taking a lot of time to install hardware, getting it a little off sometimes, and not making or using the shop made jigs they used to make for every job. I decided to invest in an Italian Sports Car jig. This is worth every penny. Paid for itself on the first job, 78 pcs of 8 inch spread cabinet pulls. In fact, my installer said the jig was more precise than the hardware itself! They actually had to tweak a couple of pulls that were off!
This Jig Made Easy Work of Cabinet Hardware Installation - by ,
5/ 5stars
Installed 77 cabinet pulls in just one day. Amazing! Intuitive tool that made installing pulls on both doors and drawers quick and easy. Well worth the cost of the tool. Once it was set it was easily reversible for left and right hand swings.
Works as advertised but slightly off center - by ,
4/ 5stars
I agree with many of the other reviewers that this tool is expensive. However, I bit the bullet and used this tool to drill holes to install 50+ cabinet pulls. I didn’t want to make the expensive mistake of ruining thousands of dollars worth of cabinet doors.Two features I would improve about this tool:1) The horizontal alignment of the jig seems to be off by 1-2mm. When I drill holes in a cabinet door with the handle installed on the left hand side (measurement markings on the tool facing me) then no problem. The holes are perfectly centered where I want them to be. When I drill holes on the adjacent cabinet door with the handle installed on the right hand side (measurement markings on the tool facing the door), then the holes are slightly off center by 1-2mm. This may not matter to a casual observer, but I know that the holes are off center by a little bit.2) I used a plastic clamp and a piece of folded cardboard underneath the “T” to support the tool against the cabinet door. Placing a piece of metal on each side of the “T” may be a good idea to improve this tool. This would make the “T” the same width as the adjustable jigs. I placed my clamp right on top of the “T” with the cardboard underneath.Other useful hints:1) Make sure to use a drill with a bubble level so that your hole is straight in a vertical orientation.2) Make sure to pay attention that your drill bit is placed at 90 degrees to the face of the cabinet door, otherwise your holes will not be straight in a horizontal orientation.3) Use a clamp and a piece of folded cardboard underneath the “T” to support the tool against the cabinet door.4) This jig is good, but it still will not save you from making careless mistakes. It is only a guide for the drill bit.Would I buy this tool again? Sure. It is obvious that the tool manufacturer reads these reviews, because I received a version of the tool that was slightly different than what was described in earlier reviews. My tool came with adjustable screw knobs instead of the Allen wrench screws that everyone else complained about.
Pays for it self in time and ease over and over. - by ,
5/ 5stars
Easy to set, mark and hold. Sturdy, well bit with metal lined drilling holes. This Jig, is the best yet!
great tool - by ,
5/ 5stars
excellent quality tool. Easy to set up and use, everything makes sense, Takes the mistakes out. Tool is a little expensive so will take I little while to pay for it..
Tap-1934 Hardware Jig - by ,
5/ 5stars
We gave this tool a 5 star because it is a wonder tool! It enabled us to install new kitchen handles in minutes! No tricky measuring, no slipping position. I would recommend this jig to any woodworker or even the weekend warrior! And the price was very affordable and the delivery was very quick.
A must have for cabinet installers - by ,
5/ 5stars
Rated a five because it was so easy to use. Adjusted easily and changed over from knobs to handles with ease. No more loss of time making jigs and taping drawer pulls. What a time saver.........especially on large kitchens with numerous knobs and handles.
New cabinets? Buy this! - by ,
4/ 5stars
This item saved me hundreds because I was able to install my own cabinet hardware. Very easy to use.Note to the designer, it would be great if you modify the extensions so that the adjustable guides would fit them. Having a fixed whole length is not ideal at all.
Very well made - by ,
5/ 5stars
Awesome well made product, I purchased these drill guides to compliment the hardware jig. Compact and easy to assemble/ dissemble. Work great in the shop or on the job.
Very well made - by ,
5/ 5stars
Awesome well made product, I purchased these drill guides to compliment the hardware jig. Compact and easy to assemble/ dissemble. Work great in the shop or on the job.
Awesome Jig, very Pleased - by ,
5/ 5stars
Very well made, does exactly what it is meant to do with precision,Would definetly reccomend. the shelf pin extensions are also reccomended.
highly recommended - by ,
5/ 5stars
perfect for me and hubby! we did put our handles and knobs to our drawers and kitchen, man look like installed by PRO!
true position jig - by ,
5/ 5stars
I have been doing trim and cabinet work for many years this is one of the best tools I have purchased, Why didn't they have this 30 years ago. Great addition to my tool box
Worth every penny - by ,
5/ 5stars
Purchased to install Hardware throughout new home. This item is worth every penny and then some! Easy to use, very well made. Highly recommended.
Best Jig Ever - by ,
5/ 5stars
We had to put pulls on kitchen and bath cabinets. This was an overall 70+ pulls. The jig madethe positioning easy and so accurate. NO miss drilled holes
Great option, but for $130 plus shipping is a little absurd. - by ,
5/ 5stars
This is a great option for anyone who build or installs cabinetry. It works great with all the new styles and sizes of drawer hardware.
Great option, but for $130 plus shipping is a little absurd. - by ,
5/ 5stars
This is a great option for anyone who build or installs cabinetry. It works great with all the new styles and sizes of drawer hardware.
awesome, but too expensive - by ,
5/ 5stars
Great tool, but way to expensive. I have friends in the machining industry and we both agree, it could be about 1/3 the price.
A tool to love. - by ,
5/ 5stars
I enjoy tools good tools and this one is Fine well made, accurate and easy to setup and a pleasure to use. The instructions were well written and easy to understand. After it was set up I test fit a handle on it to double check my self 'right on'. In the next day and a half I installed 100+ Handles on doors and drawers easily .
Simply put ...Simple and very acurate - by ,
5/ 5stars
I currently have the ' True position drill guide' which I absolutely love !! In fact I own 3 of them. These extension bars were a great addition to my cabinet installation tools. Its pin point accuracy is always spot on and consistent. I've used a lot of handle jigs over the years,and have seen more, but this product is ' HANDS DOWN ' the best. You will not regret this purchase. I would absolutely recommend this to anyone
Simply put ...Simple and very acurate - by ,
5/ 5stars
I currently have the ' True position drill guide' which I absolutely love !! In fact I own 3 of them. These extension bars were a great addition to my cabinet installation tools. Its pin point accuracy is always spot on and consistent. I've used a lot of handle jigs over the years,and have seen more, but this product is ' HANDS DOWN ' the best. You will not regret this purchase. I would absolutely recommend this to anyone
Essential for fast & accurate cabinet hardware install - by ,
5/ 5stars
Just finished using the TP1934 to do a kitchen/ full pantry, master & guest baths & it worked great. No, actually it worked perfectly for about 75 cabinets & drawers.First time I've ever installed cabinet hardware, and this was on our new cabinets, so needless to say I was a bit nervous. Lots of measure twice- drill one happened today, but by the time I was half way through, i was very comfortable with it & it all went perfectly.Highly recommended for anyone. Well worth the price.
Great Drill Guide - by ,
5/ 5stars
It worked great and saved alot of time, I had over 59 pulls to put on at 5 inches on center. It was worth every penny.
must have tool - by ,
5/ 5stars
easy to use, and change from one size to another. I highly recommend it for any cabinet builder.I have been using wooden templates that I made myself for years but this eliminates the need for any of those any more.
Great professional quality jig - by ,
5/ 5stars
Great professional quality jig. Very well constructed. Easy to set up. It will last a very long time.A carrying case would be nice for storage.
Quality - by ,
5/ 5stars
This is a great universal tool that is used everyday at our facility to mark and drill drawer fronts. A great time saving device.
Superb! - by ,
5/ 5stars
The TP-1934 is not inexpensive. It is elegantly designed, beautifully made, and a joy to use. If you install hardware frequently do yourself a favor and buy one. It will pay for itself in no time with faster better work and fewer mistakes. If you are a DIYer and only have a few handles to install, well it's hard to justify the cost, but on the other hand it is cheaper than messing up an expensive cabinet door.I bought it to install 9 pulls (though there will be more in the future). There were three different setups. It took just a few moments to set up the jig and drill the holes, correctly, every time. I've installed a fair number of pulls without this jig and I'm always nervous. The TP-1934 made the job easy, even fun. Eliminating the stress and mistakes from what can be a nerve wracking job was well worth the money. I don't regret a penny of the price.
Great hardware jig - by ,
5/ 5stars
Ordered this jig based on reviews I read online at various sites. Had about 65 knobs & handles to install & lowest bid I got to install them was $300. So this jig paid for itself & then some. It's easy to set up & use & is dead on once it is set and as long as you hold it tight against the workpiece. Plus, it's made in the USA!
Easy to use - by ,
5/ 5stars
Great tool extremely efficient, I bought a set of cabinets and had to install the hardware. This tool worked great everything came out even and precise. I thought for sure I was gonna mess it up, but this tool is idiot proof-I love it and my wife is happy too. Came in one day after ordering.
worth the money - by ,
4/ 5stars
I tried using the cheap plastic templates to install knobs and handles for a kitchen, but the hardware was apparently not a 'standard' size. This jig allowed me to customize the locations exactly and saved hours of tedious measuring.I only have two criticisms of the product:- The two pieces were misaligned by about 1/32 of an inch. It wasn't enough to affect the final results, but for the price, they should have been perfect.- Why are the bushings 5mm? That might be okay for drilling shelf holes in a foreign country, but this particular model is advertised primarily for installing cabinet knobs and handles. I ended up using an Empire automatic center punch sheathed in a brass hobby tube to mark the holes. I would like to have seen an assortment of bushings or a custom center punch.Maybe I'm missing something because the cheap plastic templates were also 5mm, but I've never seen a 5mm knob screw.
Rolls Royce of Hardware Jigs - by ,
5/ 5stars
I used the TP1934 for drilling out our custom kitchen cabinets handles. This was a dreaded task but wow was it easy with this! I looked at a few other jigs including the align rite, some cheaper ones from retail wood stores, but none matched the quality and ease of use of this product. I suggest getting the TP1935 if you have hardware with a spacing larger than 12' to install or plan to do any adjustable shelving holes. We were able to add the long hardware / line boring extensions on separately but would have been cheaper to buy together. I highly suggest this product to anyone doing this professionally or a DIY homeowner like myself who likes things done right without re-do's!
Works great but cost is a little high - by ,
4/ 5stars
After doing some online and local home depot searching, decided on the basic tool for doing a kitchen and bath cabinets for pulls. No knobs done, pulls only that had two 8 32 screws. Tool works geat and easy to use.ProWould buy again (I like high quality tools that make hard tasks simple and fast)Would recommend if you want all the knobs/pulls to align well from door to drawerGreat quality product and shipping package well builtConCost is high so unless you have a big home project or do cabinets for a living hard to justify the costThe lock down screws have a hard plastic knurled finish. It does not seem to have good grip but okay...The tools knurled plastic knobs are easy to chip if the tool is handled roughly, but the tool kit comes with a few extra ones if you break one.The drill bit provided works okay but could be higher quality as it gums up easy in soft cabinet doorsOVERALLI Enjoy the tool and wife likes it as wellWould buy again if I had to do a 'quality' large kitchen and wanted the pulls and knobs placed correctly. (Or if you do this work for a living)Would not buy for a low quality cabinet single job due to the high cost of this tool
Tremendous help - by ,
5/ 5stars
I'm a 'suit' with home repair / remodeling as a major hobby. For a total kitchen renovation, I decided to do most things myself - including installing 28 door / drawer pulls. This device is straightforward, simple to use, flawlessly designed and executed. For accuracy, time savings, confidence building and excellent results, the tp-1934 was well worth the price.
Excellent Jig - by ,
5/ 5stars
This jig works extremely well! Accurate scales made it simple to set drill guides to the proper spacing. Large contact point with door/drawer made it easy to hold the jig in place while drilling. Using this jig cuts the time to install cabinet/drawer hardware in half.
True Position Hardware Jig - by ,
5/ 5stars
High Quility, easy to use, and saves time. I installed two kitchens with hardware, kitchens had the same amount of hardware, the first took 2 hours and 15 min. the next one took 1 hour and 30 min. The more I used the jig it took less time per handle.
Expensive, but worth it for some - by ,
5/ 5stars
I purchased the TP 1935, but for most people the TP 1934 will do. I build cabinets and everyone wants a different style and size pull or handle. This guide is precision made and can handle all of them. a simple twist of a knob and set the handle width. Twist the other knob and set the set off distance from the edge, top or bottom. Drill your holes and move on. I've dropped it on concrete and didn't faze it. It's a bit expensive but since it can easily handle whatever you throw at it I think it's worth it.The only negative is the price. If they would knock about $50 off I think they would be a best seller!
Greatest time saver tool ever!!! - by ,
5/ 5stars
Got this tool a while back and it has saved me so much time installing hardware. I definitely recommend getting the TP-1935! it really helps with those 32mm shelf holes. This tool has changed the way that I work now adays. can't believe I ever got by making my own jigs for ever job. Fully adjustable and easy to work. If you are installing hardware, in the shop or on the job, get this tool!!
Great time saver and accurate drilling - by ,
5/ 5stars
True Position Drill GuideUsed this for installing cabinet handles and it made the job very easy and every hole was spot on. Highly recommended.
×
×

Cart

As a thank you for subscribing we're giving you 10% off your next order, use this code at checkout in the next 14 days:

Welcome10

Days
Hours
Minutes
Start Shopping

Simply apply this code to your shopping cart to see your savings:

welcome10

Start Shopping

10% OFF

your first order

+ tips, exclusive offers, updates and more!

Item added to your cart

0 items in the cart ($0.00)

Continue Shopping Go To The Cart